rickyhils Posted August 20, 2019 Share Posted August 20, 2019 1991 Loyale FWD. Inner front wheel hub seal needs replacing. With old seals [inner/outer] pulled out, can I push fresh grease through the bearings while they are still in the hub? I can scoop out the old grease as I go. And is it better to see if those seals are available from Subaru? Bearings are still good. I don't do off road driving. Thanks Link to comment Share on other sites More sharing options...
armedequation Posted August 20, 2019 Share Posted August 20, 2019 I just replace my bearings and they arent terribly hard to remove and replace. You could pack them when they are in the hub buti dont think you could do it as thoroughly as you can with them out Link to comment Share on other sites More sharing options...
FerGloyale Posted August 21, 2019 Share Posted August 21, 2019 There is no point in replacing the seals if you aren't replacing the bearings. Link to comment Share on other sites More sharing options...
Dee2 Posted August 21, 2019 Share Posted August 21, 2019 As an alternative, if OEM are not available, you might want to see if Altrom seals are available from NAPA . They are OEM quality . Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now