Jump to content
Ultimate Subaru Message Board

EA81 Brat Wheeltrack Widths?


Recommended Posts

Hello all,

Does anybody know the front and rear track widths for an '87 Brat?

I'll be looking at trying to DIY my wheel alignment soon and I'd be interested if front and rear are both the same or if the front is wider, I'm sure I read somewhere that it was.

Thanks.

Link to comment
Share on other sites

Here is the setup I came up with -


Not in these pictures, I added 4 mini plumb bobs, and used 2 tape measures to get the side to side distance.  The FSM has the specifications on how parallel the readings need to be by length.

Link to comment
Share on other sites

  • 2 months later...
On 10/11/2019 at 9:52 AM, DaveT said:

Here is the setup I came up with -


Not in these pictures, I added 4 mini plumb bobs, and used 2 tape measures to get the side to side distance.  The FSM has the specifications on how parallel the readings need to be by length.

Time to re-visit this, as I will be doing this soon as the Brat has been off the road for a while. Excuse my ignorance but what to you mean by "FSM"

I think I have a plan formulated but I need the track widths front and rear, I've searched everywhere on the web but there seems to be a lot of conflicting info.

It would be much appreciated if somebody could let me know.

Thanks!

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...