Chris Parsons Posted October 15, 2019 Share Posted October 15, 2019 First post and I just acquired a 1984 GL Brat that needs serious work. First order of business - the fuel tank has some bad rust on the outside and is full of two year old fuel. I'd like to just replace the tank and the gas lines instead of trying to clean the gunk out. Where can I source these parts? I don't need OEM, just something that will fit/function. I have searched this forum to no avail. Thank You! Chris Link to comment Share on other sites More sharing options...
silverhelme Posted October 15, 2019 Share Posted October 15, 2019 Does the tank actually have holes in it because of the rust? If not I would just clean it up paint and seal the outside then flush the inside. Some people get away with sealing the inside also but that seems to be hit or miss whether it works right and doesn't clog everything up. If the tank is not salvageable new parts are no longer available. You will have to source a decent used tank which are getting hard to find. I have heard of some people trying to fit an aftermarket fuel cell but have never seen a finished setup . Link to comment Share on other sites More sharing options...
Chris Parsons Posted October 15, 2019 Author Share Posted October 15, 2019 No visible holes but I fear the tank is wearing pretty thin in some spots. I'll take a wire brush to the rust this weekend and see how much tank is left remaining. Link to comment Share on other sites More sharing options...
silverhelme Posted October 15, 2019 Share Posted October 15, 2019 If you start looking for a replacement tank and eventually want to ej it be on the lookout for an 83-84 turbo tank. It's already setup for fuel injection. Link to comment Share on other sites More sharing options...
BRATwurst Posted October 28, 2019 Share Posted October 28, 2019 When I needed a new tank for my first BRAT, I looked extensively online and came up with zilch. I ended up soldering and tank sealing the original. The year or two I had it after the repair everything was still holding up. I didn't have any issues to my knowledge with the tank sealer gunking up my lines, but it may have been happening. THe sealer I used was POR-15. Link to comment Share on other sites More sharing options...
Dan harty Posted February 9, 2020 Share Posted February 9, 2020 I have a tank out of a 86brat if your still in need pretty nice shape Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now