wagons Posted December 31, 2019 Share Posted December 31, 2019 Hey all! Got the EA82 wagon running. Weber swap and running strong. However the idle will not drop below 2500. I have set the idle screw 1 turn on the weber and it starts, but revs to 3000RPM. Turn ditributor both ways, revs to 2500 then to 4000RPM. Somebody have any ideas? Link to comment Share on other sites More sharing options...
DaveT Posted December 31, 2019 Share Posted December 31, 2019 Almost has to be the throttle isn't closing. Maybe the choke isn't moving of f the fast idle cam? Link to comment Share on other sites More sharing options...
wagons Posted January 1, 2020 Author Share Posted January 1, 2020 @DaveT i just checked and sure enough the throttle wasnt closing! I got her idling at 850RPM! Now a new problem arised. All the fuel is draining back to the tank and i have to put some in the carb to start. Another problem is its still pissing oil out of the valve covers. I did gaskets and they tightened down, but i wonder if the camshaft seals are the culprit lol. I am now looking for a decent EJ to swap in, as i am tired of this EA82 and no parts available lol Link to comment Share on other sites More sharing options...
DaveT Posted January 1, 2020 Share Posted January 1, 2020 If they have not been replaced within the last 10 years, and or 100k miles, cam seals and the orings are likely leaky. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now