TXJayhawk Posted February 4, 2020 Share Posted February 4, 2020 (edited) Going to use POR 15 (degreaser, metal etching, POR 15) then prime and paint. Any other tips? Edited March 23, 2020 by TXJayhawk Link to comment Share on other sites More sharing options...
moosens Posted February 6, 2020 Share Posted February 6, 2020 Was the strip of foam still on the fender ? Subaru used a sealant foam as a squeak reducer and that over time caused countless fenders to develop that same rust. Good luck with it. Not much to worry about on yours. Link to comment Share on other sites More sharing options...
TXJayhawk Posted February 6, 2020 Author Share Posted February 6, 2020 Yes it was still there gone now Link to comment Share on other sites More sharing options...
SUBARU3 Posted February 8, 2020 Share Posted February 8, 2020 YES...get that foam out of there! Clean, sand and treat. Then primer and paint/multiple coats. Use butyl tape on that seam to seal those new fenders I'm going to sell you!! Link to comment Share on other sites More sharing options...
SUBARU3 Posted February 8, 2020 Share Posted February 8, 2020 Also looks like you will need to cut some damage out and replace some strips of metal. Link to comment Share on other sites More sharing options...
TXJayhawk Posted March 9, 2020 Author Share Posted March 9, 2020 (edited) POR 15 is done. Edited March 23, 2020 by TXJayhawk 1 Link to comment Share on other sites More sharing options...
moosens Posted March 10, 2020 Share Posted March 10, 2020 Sweet ! Link to comment Share on other sites More sharing options...
Naked Buell Posted March 11, 2020 Share Posted March 11, 2020 Nice job. A must to keep the Brats on the road and looking awesome. Link to comment Share on other sites More sharing options...
moosens Posted March 12, 2020 Share Posted March 12, 2020 I’m just curious if you’re going to keep it nice n stock - original , or if at this time you’d have considered a swap to the quad light front ? At this point move forward , I’m sure. It’s just such an opportunity right now that knuckleheads like me feel they have to ask. Link to comment Share on other sites More sharing options...
TXJayhawk Posted March 23, 2020 Author Share Posted March 23, 2020 It is a GL the new old stock lights I got from Moosens are on the passenger side Link to comment Share on other sites More sharing options...
moosens Posted March 25, 2020 Share Posted March 25, 2020 Sweet ! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now