910GL Posted May 23, 2020 Share Posted May 23, 2020 Dowel pins to mate EA82 engine to tranny are stuck in the old motor and I destroyed them trying to get them out; they need to be on the tranny side for my adapter plate. Does anyone know if these are still available from Subaru? Haven't had any luck so far looking through online parts diagrams for a part #. Thanks Link to comment Share on other sites More sharing options...
Step-a-toe Posted May 23, 2020 Share Posted May 23, 2020 (edited) I know when I was after an internal dowel for the gearbox the answer was dowel comes as part of the casing i pulled a perfectly good box apart to get another little sucker .... Edited May 23, 2020 by Step-a-toe Link to comment Share on other sites More sharing options...
DaveT Posted May 23, 2020 Share Posted May 23, 2020 Don't know, but they are pretty likely standard metric dowel pins. Decent car parts store might have them, just as generic parts. I usually check Mcmaster-carr for things like this also. Link to comment Share on other sites More sharing options...
el_freddo Posted May 24, 2020 Share Posted May 24, 2020 How did you kill those things? Cheers Bennie Link to comment Share on other sites More sharing options...
910GL Posted May 24, 2020 Author Share Posted May 24, 2020 They were seized in there pretty fierce. I got one out after battling with some vice grips. I'll take it in to NAPA and try to get something "close." Thanks guys. Link to comment Share on other sites More sharing options...
el_freddo Posted May 25, 2020 Share Posted May 25, 2020 I’d clean it up and reuse it. Not a critical part. It’s job is to align the engine and gearbox with more precision than the mounting bolts. Being slightly smaller won’t matter. Cheers Bennie Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now