opus Posted September 6, 2020 Share Posted September 6, 2020 Is there such a thing available with all the rebuild, install torques specs, in list form? Instead of going page by page in the manual? EJ253 Quote Link to comment Share on other sites More sharing options...
el_freddo Posted September 6, 2020 Share Posted September 6, 2020 Yes, as you read page by page you write them out on some card or paper. Works for me. Cheers Bennie Quote Link to comment Share on other sites More sharing options...
opus Posted September 6, 2020 Author Share Posted September 6, 2020 Wasn't feeling like reading all that much. I know there is a list for EA's, thought I'd try. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 6, 2020 Share Posted September 6, 2020 (edited) What do you need torque specs for? About the only thing that needs to be torqued is the head bolts. That's just a single page. If you need to pull out a torque wrench for basic fasteners then you need to get a better feel for torque values. All those values are chosen by thread diameter and pitch. It's just an engineering chart. Something you can easily master by feel. GD Edited September 6, 2020 by GeneralDisorder Quote Link to comment Share on other sites More sharing options...
opus Posted September 6, 2020 Author Share Posted September 6, 2020 Rods, mains, etc. Like I said, EA's have one sheet and I can pick what I need to know. I dont need torques for most and all I have is a .pdf manual. No biggie..... Quote Link to comment Share on other sites More sharing options...
Rampage Posted September 7, 2020 Share Posted September 7, 2020 With a PDF file you can print "current page" to your printer. I use Adobe Reader DC (free) to view pdf files. For any page I want to save out of the FSM PDF, I right click on the page I'm looking at and select Print, then for the printer I select Microsoft print to PDF. Then I create a new unique name folder and name the file and it will save that page as a PDF file in that folder. Later I can go through that folder and open and print any of those files to the printer. Don't forget to select your normal printer. I save a lot of wiring diagram pages that way, so I don't have to scroll up and down through the whole thing. Using Adobe, I can have a lot of pages open in different tabs and click on the different tabs to see what is connected to what. Quote Link to comment Share on other sites More sharing options...
opus Posted September 7, 2020 Author Share Posted September 7, 2020 I know this. I was just wanting one simple page with all the torque specs, like Toyota does. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 7, 2020 Share Posted September 7, 2020 2 hours ago, opus said: Rods, mains, etc. Like I said, EA's have one sheet and I can pick what I need to know. I dont need torques for most and all I have is a .pdf manual. No biggie..... I would suggest you not split the block. Especially on a the NA engines - that's a learning curve you really don't want to go through. GD Quote Link to comment Share on other sites More sharing options...
opus Posted September 7, 2020 Author Share Posted September 7, 2020 I've got no choice. I'll see how trashed it is before I determine what the next step is. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 7, 2020 Share Posted September 7, 2020 14 minutes ago, opus said: I've got no choice. I'll see how trashed it is before I determine what the next step is. The choice is to get a good used one or a reman short block from Subaru. Your chances of success at putting it back together is very low and the machine work required makes it generally a wash vs. a used block. GD Quote Link to comment Share on other sites More sharing options...
opus Posted September 7, 2020 Author Share Posted September 7, 2020 I'm not intimidated by it. Found a runner at Spauldings, 146k miles for $1900, that aint gonna happen. Surely not going JDM. Wouldnt buy anything from Subaru themselves, I dont have that kinda money even if I wanted to. Anyways, this has got off topic, thanks all for the input. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 7, 2020 Share Posted September 7, 2020 48 minutes ago, opus said: I'm not intimidated by it. LOL. Words of the ignorant. You should be. I give these warnings for good reasons. I train tech's on short block assembly. Without that hands on training the early stage success rate is extremely poor. There are hard won lessons to be learned. Do you have the proper measuring tools? You WILL need a bore gauge and the skill to read it down to at least a couple tenths. Success depends on proper machine work as well. Ensure that someone in your area is equipped to do a main line hone on the block and is capable of hitting 0.001" on every main. GD Quote Link to comment Share on other sites More sharing options...
opus Posted September 10, 2020 Author Share Posted September 10, 2020 Guess I wont be needing torque specs after. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 11, 2020 Share Posted September 11, 2020 Nope. That's garbage. Just get a used block. Plenty out there. GD Quote Link to comment Share on other sites More sharing options...
opus Posted September 11, 2020 Author Share Posted September 11, 2020 It was made to my attention that the EJ253 block has different pistons than others? Nothing around here, but I think I have a short block coming. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 11, 2020 Share Posted September 11, 2020 251 and 253 use the same piston (or so close it doesn't matter in practice). Some years (2005 primarily) use different rings and so of course have different part numbers. Otherwise they are functionally the same. GD Quote Link to comment Share on other sites More sharing options...
opus Posted September 11, 2020 Author Share Posted September 11, 2020 Righto..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.