Jump to content
Ultimate Subaru Message Board

2000 Impreza - Wiring for Towing a Small Trailer


Recommended Posts

I'd like to tow a small utility trailer with my 2000 Impreza. I have the hitch but need to install the basic 4-prong trailer wiring on the car. 

I read that some cars come with the wiring pre-installed from the factory ... so you just need a kit with the right connector to get the trailer wiring set up. Other cars require splicing, and hard wiring the extra cables, etc.

Not sure if my Impreza RS would have been set up for towing from the factory ... took a quick look today but didn't find anything ... but it was -10C and really windy so I didn't look that hard. 

Thanks in advance! 

 

 

 

Link to comment
Share on other sites

You'll need an electronic adapter - your Subaru has separate brake and turn signals, so the adapter is needed to combine them.  The Subaru part was rather salty (if it's even available) but U-Haul had one that was more reasonably priced.

Link to comment
Share on other sites

Wagon or Sedan?

The Wagons, have the tail light access covers inside.  Remove them and you will see the wires for the tail lights.  Everything is on the drivers side except for the Right/Passenger side blinker.

For that one you need to run a single wire to the pass side.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...