89GLWarWGN Posted February 25, 2021 Share Posted February 25, 2021 Hey Guys, I recently bought a 86GL with the stock Hitachi Carb. I have an 89GL parts car with fuel injection and would like to swap it over to my 86. I know this was added to the USRM way back and have found links but they are all dead. Can someone post the most recent link to this for me I can't seem to find it to save my life. Link to comment Share on other sites More sharing options...
DaveT Posted February 25, 2021 Share Posted February 25, 2021 I don't know about the links. IF the parts car runs, you just need to swap all the pieces, including the wiring. Link to comment Share on other sites More sharing options...
89GLWarWGN Posted February 26, 2021 Author Share Posted February 26, 2021 Yeah the parts car ran when I parked it so should be good. From my reading I believe I'll need the ECU and maybe the fuel pump too? Wasn't sure, thats why I was hoping to find a step by step which sounds like exists somewhere. If all else fails I'll pull the system and compare and if my 86 doesn't have it I'll bring it over. Link to comment Share on other sites More sharing options...
DaveT Posted February 26, 2021 Share Posted February 26, 2021 Oh yes, the fuel pump. The fuel pressure on SPFI is 21 PSI, so you need all the hoses & filter upgraded. IF you can, find a copy of at least the schematics from the FSM for both. The FSM also shows connector locations, etc. makes this kind of thing easier. Link to comment Share on other sites More sharing options...
turbodog Posted February 26, 2021 Share Posted February 26, 2021 (edited) hey theres another member of the board who wants to convert to carb, try collaborating with him! im sure he'd love the carb parts Edited February 26, 2021 by turbodog Link to comment Share on other sites More sharing options...
Numbchux Posted February 26, 2021 Share Posted February 26, 2021 It would be different if your 86 is an EA81 or EA82 Here's the EA81 SPFI swap write-up from the Retrofitting FAQ https://www.dropbox.com/s/k4kdbpaclc6sko4/EA81_SPI_guide.pdf?dl=0 Link to comment Share on other sites More sharing options...
89GLWarWGN Posted February 27, 2021 Author Share Posted February 27, 2021 Thanks guys, both are EA82s i'd totally be willing to sell him the carb parts. Who is it? Thanks for the link should give me an idea for the swap anyway. Link to comment Share on other sites More sharing options...
DaveT Posted February 27, 2021 Share Posted February 27, 2021 A couple years ago, I did a swap with another member. I had an extra carb and intake, swapped for his SPFI tb and intake. Better than selling - most of these parts are NLA. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now