Jump to content
Ultimate Subaru Message Board

High Output Alternator for EA81


Recommended Posts

I put an EJ alternator on my brumby. Works well. 

hWYvpk.jpg 

You need to cut down the bush on the EA alternator to 8mm thick, fit this to the EJ alternator then shave the EJ alternator housing until the EA pulley is clear to spin freely. 

I plugged the EA plug into the EJ wiring with some spade connectors and upgraded the charge wiring with a fuse - and ran a second wire to the positive cable at the starter. Worked out well and completely reversible if I ever feel the need to go back to something stock. 

Cheers 

Bennie

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...