DV-523 Posted March 15, 2021 Share Posted March 15, 2021 (edited) Hello Everyone! I'm pretty new here. Just bought an 89 GL in Idaho last year and it has quickly clawed it's way up the list of favorite vehicles. It's a 5 speed manual 4wd version and I love it. It's previous owner wasn't willing to put much into it, but with a little work it's turning into quite the strong runner. Thus far I've done head gaskets on it, valve cover gaskets, New thermostat, replaced the radiator, and the hoses, new windshield, and some rust repair around the windshield, as well as replaced the flooring on the interior with a heavy duty vinyl (Which was far too thick, Next time, I'm going to look for a much more flexible option.). Up next are the brakes! They started squealing today and one of the rotors is warped, so I figured I might as well redo all 4 corners. I also have some significant rust repair to do on the rear quarters. But all in all, it's coming along quite nicely! Edited March 15, 2021 by DV-523 Images Too Big 1 1 Link to comment Share on other sites More sharing options...
DV-523 Posted March 15, 2021 Author Share Posted March 15, 2021 (edited) Here's some of the Project Pictures Edited March 15, 2021 by DV-523 Images Too Big Link to comment Share on other sites More sharing options...
DV-523 Posted March 15, 2021 Author Share Posted March 15, 2021 (edited) and some more project Pictures Edited March 15, 2021 by DV-523 Images Too Big 2 Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted April 2, 2021 Share Posted April 2, 2021 Looks like the Project is going pretty well! Greetings from Honduras. Link to comment Share on other sites More sharing options...
Subasaurus Posted April 5, 2021 Share Posted April 5, 2021 (edited) love it! I noticed you said one of the rotors was warped, are the rears disks or drums? Edited April 5, 2021 by Subasaurus Link to comment Share on other sites More sharing options...
DV-523 Posted May 4, 2021 Author Share Posted May 4, 2021 (edited) On 4/5/2021 at 11:41 AM, Subasaurus said: love it! I noticed you said one of the rotors was warped, are the rears disks or drums? You know, that's a good question. Last time I tried to take the rear wheels off they were rusted on to well, so I've just let them lie for a while. I'll check it out tonight and let you know what I find though! Turns out they're rear drums. too bad, but They'll do the job. Edited May 5, 2021 by DV-523 update on the status of the rear brakes Link to comment Share on other sites More sharing options...
Subasaurus Posted May 6, 2021 Share Posted May 6, 2021 On 5/4/2021 at 11:31 AM, DV-523 said: You know, that's a good question. Last time I tried to take the rear wheels off they were rusted on to well, so I've just let them lie for a while. I'll check it out tonight and let you know what I find though! Turns out they're rear drums. too bad, but They'll do the job. they definitely will! if you ever find rotors in the rear of one say at some junkyard, TAKE THEM!!! I screwed up by not taking them when i saw them because the sun was strong that day, went home. the next weekend i went to grab them and there was a blank spot where the car would have been, i asked one of the yard workers, and turned out the vehicle was crushed and scrapped already, really sad when that happened, it was on a 87 GL-10. Link to comment Share on other sites More sharing options...
dameson Posted May 11, 2021 Share Posted May 11, 2021 I usually go to local junkyards to find the parts I need. Good luck on your project. Link to comment Share on other sites More sharing options...
DV-523 Posted March 6 Author Share Posted March 6 I have some sad news. Unfortunately, my wagon is being taken off the road.😔 I moved out east to Ohio, and the amount of salt they dump on the road has dealt a killing blow to the GL. The rear wheel well as well as unibody frame that runs along the pinch weld is thin enough you can push holes in it with your fingers so I'm going to be retiring the car. On a happier note, I bought another White Loyale! This one's a 92 instead of an 89, and has a pushbutton instead of the dual range transmission, and a few other minor differences. It had been wrecked, but the damage was minor. It's originally a California car, so there is next to no rust on the car anywhere which I am VERY excited about and it's even had an underbody spray done to it. I'm making sure the paint is perfect top to bottom before I go anywhere in this car out here. one big drawback is that this car did not come with a title. looks like it's not been registered for some time, so I'm going to be trying to re-title it, but I'm not looking forward to all that paperwork. I've never done anything like that before, so any advice from someone who has gone through that process would be appreciated. Anyway, I'll try to get pictures here soon. Link to comment Share on other sites More sharing options...
idosubaru Posted March 6 Share Posted March 6 23 minutes ago, DV-523 said: I have some sad news. Unfortunately, my wagon is being taken off the road.😔 I moved out east to Ohio, and the amount of salt they dump on the road has dealt a killing blow to the GL. The rear wheel well as well as unibody frame that runs along the pinch weld is thin enough you can push holes in it with your fingers so I'm going to be retiring the car. On a happier note, I bought another White Loyale! This one's a 92 instead of an 89, and has a pushbutton instead of the dual range transmission, and a few other minor differences. It had been wrecked, but the damage was minor. It's originally a California car, so there is next to no rust on the car anywhere which I am VERY excited about and it's even had an underbody spray done to it. I'm making sure the paint is perfect top to bottom before I go anywhere in this car out here. one big drawback is that this car did not come with a title. looks like it's not been registered for some time, so I'm going to be trying to re-title it, but I'm not looking forward to all that paperwork. I've never done anything like that before, so any advice from someone who has gone through that process would be appreciated. Anyway, I'll try to get pictures here soon. I’ve rebuilt a ton of totaled cars which many people claim is hard, terrible, and fraught with danger and potential rejection or unknown problems and the state is out to get you. I’m an untrained DIY guy, never had shop classes or been in auto business. Never had a problem rebuilding a totaled car and getting a real title for it. It’s not a big deal. I haven’t done a title-less car but after the rebuilding process I wouldn’t be deterred if the right situation presented itself. I’ve seen the process listed looking at potential buys and other car protocols. The state tells you what to do - go do what they say. In my experience the inspectors and people involved aren’t as bad to deal with as many claim. They just want to see the I’s crossed and T’s dotted and nothing sketchy and you’re good. 2 Link to comment Share on other sites More sharing options...
moosens Posted March 7 Share Posted March 7 Look into a Vermont title. info is out there and likely mentioned in this forum Not as worrisome as you may think. Best of luck. And congratulations on the solid body find. My opinion: install the D/R 5spd as it is the grand goddess of all the transmissions Subaru threw at us. And from speaking with a master tech years back I recall he mentioned getting an 88 or 89 would be best. Final revisions etc. Enjoy! Link to comment Share on other sites More sharing options...
DV-523 Posted March 7 Author Share Posted March 7 Thanks for the encouragement and advice idosubaru and Moonsens. I'll be pressing forward and doing a lot of digging through the forums I'm sure. Moonsens, I agree, swapping the trans is in the dream, however, I know the trans from my old GL is in rough shape. I'll need to do my research on how rebuildable they are, or if the parts are even available. 1 Link to comment Share on other sites More sharing options...
moosens Posted March 8 Share Posted March 8 Subafreak resealed my 4spd 1978 4wd transmission sometime around 2012 I think. He/we were able to score the seals and related but barely. If you’re ever going to do it I suggest hunting down the needed seals and gaskets etc immediately. Good luck and enjoy! Link to comment Share on other sites More sharing options...
moosens Posted March 8 Share Posted March 8 One good thing about the older 70’s transmissions is they hadn’t begun to really suffer the synchro wear issue. It was nice seeing that transmission split and exposed. Link to comment Share on other sites More sharing options...
newmexguy Posted April 20 Share Posted April 20 On 3/6/2024 at 8:11 PM, moosens said: Look into a Vermont title. info is out there and likely mentioned in this forum Not as worrisome as you may think. Best of luck. And congratulations on the solid body find. My opinion: install the D/R 5spd as it is the grand goddess of all the transmissions Subaru threw at us. And from speaking with a master tech years back I recall he mentioned getting an 88 or 89 would be best. Final revisions etc. Enjoy! I've heard the VT title thing or "loophole" has closed. Not an expert, however. Others have said Alabama has a "looser" process. If you had been closer, would have given you a killer deal on the '89 DL wagon carcass I finally liquidated. It had a title. Still have near complete new gasket set, plus more new for the EA 82 engines, will make a package deal if interested. Dave S. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now