Phil Hyde Posted August 24, 2021 Share Posted August 24, 2021 Hi everyone, Trying to check my vehicle for stored CEL codes. From my recent troubleshooting, the CEL has been illuminated when the car isn't starting properly. Based on my understanding, the wires are in the engine bay, and I need to connect the white connector to read codes. The green connector is a "test" connector. Right so far? When I connect this white connector and turn the key on, all I get is a flashing CEL light. Does that mean there are no stored codes? Link to comment Share on other sites More sharing options...
DaveT Posted August 25, 2021 Share Posted August 25, 2021 To read the codes that are currently flagged - just leave them unconnected. If the CEL is on, the codes are being flashed on the LED on the ECU, which is bolted to the bottom of the steering column. You have to remove the plastic kick panel to see the hole where the LED is hidden. Long flashes are the tens place, short are the 1s. If there are more than one code, they are flashed sequentially, and repeated. 1 Link to comment Share on other sites More sharing options...
Phil Hyde Posted August 25, 2021 Author Share Posted August 25, 2021 Thanks! Very helpful. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now