moosens Posted September 26, 2022 Share Posted September 26, 2022 Already know about the little switch at the head of the shifter. Will discuss that later. Wondering if there’s a vacuum related issue that causes this car to not want to get out of park and into any other selection. Recent issue, just seems to be getting worse. I can or until recently could just pump the brake pedal a couple times and you’d feel the pedal settle into its spot that will then release the shifter. But these last 48 hours or so things seem to be getting worse. I’ve had to pump the brakes a lot. I mean like when I’m at work I’m worried that somebody is going to think I have some medical issue or something with my brakes going on and off so much. Last night a guard drove over to me but at that last second the pedal went fully and I could move. So I looks pathetic when I’m trying to disengage park. Ok about that little switch. Past experiences I never noticed what I see in this car. There’s a screw head (Phillips) and that doesn’t seem to move. What am I failing to see there. Doesn’t look like the other automatic Subarus we’ve had. I found no success trying to push that down. Maybe I should read the manual !! But that’s why we have these cool conversations. Thanks ! Link to comment Share on other sites More sharing options...
moosens Posted September 26, 2022 Author Share Posted September 26, 2022 Ok I just learned a little from my 2003 owners manual while looking through that for it’s own issues. Now I see the new fangled method of that little screw where there once was a push switch. Link to comment Share on other sites More sharing options...
lmdew Posted September 27, 2022 Share Posted September 27, 2022 Just try the mechanical release, push a 1/4" rod down the hole to release. If that works it's electrical. Link to comment Share on other sites More sharing options...
moosens Posted September 27, 2022 Author Share Posted September 27, 2022 Maybe I’m not seeing something. Will look further but this issue is still random. Sometimes it’ll work as normal but when it gets stuck it’s becoming a joke. I realize there’s a switch but the brake pedal feels like it’s holding a bit extra pressure until it gets so I can finally work the selector. Maybe the switch itself is a bit worn and sticking and on its way out which causes that pedal to feel as it does. So not maybe vacuum but it really feels like it with my brake foot. Link to comment Share on other sites More sharing options...
lmdew Posted September 27, 2022 Share Posted September 27, 2022 Put the E-brake on when you park. Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted September 27, 2022 Share Posted September 27, 2022 does this car have a hill-holder system? Link to comment Share on other sites More sharing options...
moosens Posted September 27, 2022 Author Share Posted September 27, 2022 It’s an automatic so no hill holder. Yes Larry I always use the parking brake. Are you saying put the parking brake on before I turn the car off ? You can feel that brake pedal isn’t quite right, a little too much pressure. But then it seems to get that millimeter of travel when you can feel the brake pedal settle that tiny bit. Or it’s my brain. Always trouble with that thing. I know this seems weird like why is this guy insisting it’s some pressure related deal and not just talking about the switch. Can that switch when wearing down create these symptoms? Probably haven’t changed out one of those since an early 80’s maybe Loyale late 80’s car. Link to comment Share on other sites More sharing options...
heartless Posted September 27, 2022 Share Posted September 27, 2022 that switch is 100% electrical, so not sure how brake pedal "pressure" is making a difference.. unless there is something related to the brake switch that is affecting operation (the one that tells the brake lights to come on - and unless i am majorly mistaken, it also tells the shifter switch it is ok to release) *see page 37 of the "1990 Legacy Wiring Diagrams" found here: http://jdmfsm.info/Auto/Japan/Subaru/Legacy_Outback/1990-1994/ going to toss this out there as something to try.. when you put your foot on the brake and are ready to move the shift lever, try pushing it forward just a tad, before pulling back.. 1 Link to comment Share on other sites More sharing options...
moosens Posted September 28, 2022 Author Share Posted September 28, 2022 Ok thanks ! Yeah that electrical switch has to engage mechanically and I’m just thinking that part of it might be sticking etc. Old school they had a plunger shaft and then I think the “hairpin” contact if I recall. So far the last couple of trips I haven’t had too much trouble with it. Seems playing with the parking brake at the right time also helps. Or it’s my brain again. But I’m going to try the method you suggested Heartless and see if that does anything. 1 Link to comment Share on other sites More sharing options...
lmdew Posted September 28, 2022 Share Posted September 28, 2022 Yes put the E brake on before shifting into park and turning off the car. It will keep the tension off the parking lock in the trans. 2 Link to comment Share on other sites More sharing options...
moosens Posted September 28, 2022 Author Share Posted September 28, 2022 Thanks Larry I did notice how that seemed to work the first time. I think the second time my brain mess up the order or something... ok I gotta sleep. Thanks !! Link to comment Share on other sites More sharing options...
heartless Posted September 28, 2022 Share Posted September 28, 2022 when the cable broke on my 02 forester, i had the shift mechanism completely apart - cleaned and re-lubricated everything.. pretty simple mechanism in general if you have the time to do it, might be worth while to get in there and have a look see.. make sure there is nothing physically getting in the way and everything is working the way it should. the other alternative to malfunction would be the brake switch down at the pedal.. And now that i am thinking about it.. that could be the source of what you are feeling.. the plunger of the brake switch doing funky things... hmmmm... 1 Link to comment Share on other sites More sharing options...
NV Zeno Posted October 1, 2022 Share Posted October 1, 2022 It sounds like a micro switch that may have slipped ever so slightly out of position..just enough to intermittently operate. I've been chasing a similar problem on one of my cars for years. I like the idea of the micro switch on the brake pedal as described above. Just my 2 bucks 1 Link to comment Share on other sites More sharing options...
lmdew Posted October 3, 2022 Share Posted October 3, 2022 I've had the little bumper on the pedal come off and the switch push rod goes right through the hole. Crazy. 2 Link to comment Share on other sites More sharing options...
heartless Posted October 4, 2022 Share Posted October 4, 2022 what lmdew said.. ^^ On 10/1/2022 at 10:08 AM, NV Zeno said: It sounds like a micro switch that may have slipped ever so slightly out of position the brake switch is not a micro switch at all.. it is actually kind of large in overall size. 1 Link to comment Share on other sites More sharing options...
moosens Posted October 4, 2022 Author Share Posted October 4, 2022 Oh man lucky me I get to contort my body and stick my head down there. Ok next chance I get. I’m bouncing around cars these days. Should be back in the 94 soon. Thanks guys ! 1 Link to comment Share on other sites More sharing options...
heartless Posted October 4, 2022 Share Posted October 4, 2022 7 hours ago, moosens said: Oh man lucky me I get to contort my body and stick my head down there. Ok next chance I get. yes, lucky you.. not sure i could do that anymore.. between arthritis and fibro.. just too painful... i miss the days that I could do pretty much what i wanted to do, when i wanted to do it. my experience with the pedal thing that lmdew describes had to do with cruise control on a manual, and the switch was on the other side (above, not below) for the clutch pedal, but same basic situation.. the switch was not being depressed properly because of a missing pad on the pedal shaft. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now