EA82Turbo Posted July 18, 2004 Share Posted July 18, 2004 Hi Everyone I have a turbo ea81 and device in the picture below is not wired in. The wires leading to this device are from the negitive coil and dizzy. If I put the wires to this device the engine will not run. Hope pics show up? Might have to look in my gallery Could someone please let me know what this is? and if you know how should it be plugged in? Included pic of whole engine bay as had been asked for in previous posts. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted July 18, 2004 Share Posted July 18, 2004 Looks aftermarket whatever it is - with that silver label and all. GD Link to comment Share on other sites More sharing options...
Turbone Posted July 19, 2004 Share Posted July 19, 2004 If I could find the pic I might be able to tell you Link to comment Share on other sites More sharing options...
bajavwnsoobnut Posted July 19, 2004 Share Posted July 19, 2004 If I could find the pic I might be able to tell you http://www.ultimatesubaru.org/photos/showphoto.php?photo=787 thry this turbone and it looks like an aftermarket coil amplifier prolly from pertronix Link to comment Share on other sites More sharing options...
Turbone Posted July 19, 2004 Share Posted July 19, 2004 That thing is soooo ooold, I would be real surprised if you got volts out of it. For some reason when I see things like this, it reminds me of something my Dad told me when he didnt want to tell me what he was making. He would say "Its a skittle for a ginsaw" Link to comment Share on other sites More sharing options...
EA82Turbo Posted July 21, 2004 Author Share Posted July 21, 2004 Sorry about pic not showing and bad lighting on pic in my gallery. But anyways, The device is made by AutoLogic (I think?) it also has HI-ENERGY and ignition systems written on it. My car runs about 15-18psi and when over 5000rpm in 4th or 5th it misses a little. Could this be a lack in spark because of this device? Link to comment Share on other sites More sharing options...
subiemech85 Posted July 21, 2004 Share Posted July 21, 2004 replace your spark plugs, cap, rotor, and check the wires Link to comment Share on other sites More sharing options...
EA82Turbo Posted July 21, 2004 Author Share Posted July 21, 2004 Done that Looking for more power Link to comment Share on other sites More sharing options...
bajavwnsoobnut Posted July 21, 2004 Share Posted July 21, 2004 well I would just remove that and get a MSD box with the built in rev limiter control stuff or there is one that is made by a different company that is solidstate for the rev limiter so you don't hafta buy the chips (sometimes called pills) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now