garner Posted July 19, 2004 Share Posted July 19, 2004 Ok, let me show off a bit. This has been such a battle but the EA82T in Gen one brat is running, driving, burning rubber etc. It also looks pretty cool under the hood... Behold.... http://usmb.net/gallery/garners-sub-a-rama/underthehoody garner Link to comment Share on other sites More sharing options...
iluvdrt Posted July 19, 2004 Share Posted July 19, 2004 That doesn't look like an ea82t at all. Where did you get your piping, and intercooler? I must know. That looks SWEEEET!!!1111!!! Also is that a vf34 turbo? did you make the flange? how much boost are you running? Man i'm speechless at how nice that looks. Link to comment Share on other sites More sharing options...
Qman Posted July 19, 2004 Share Posted July 19, 2004 Looks very nice Garner. Link to comment Share on other sites More sharing options...
MorganM Posted July 19, 2004 Share Posted July 19, 2004 Thats some custom action there; very well done! Love the intercooler !_! Link to comment Share on other sites More sharing options...
garner Posted July 19, 2004 Author Share Posted July 19, 2004 thanks, answers for you iluvdrt, -Pipes are stainless mandrel bends from Jegs -Intercooler is stock WRX tmic -TDO4 turbo. and yes, I made the flange and an "up a little further pipe" see it here: http://usmb.net/gallery/garners-sub-a-rama/uppipe2 Just 8 psi of boost right now, Seems like plenty for a rig that handles like a radio flyer wagon. more to come once she handles garner Link to comment Share on other sites More sharing options...
Sweet82 Posted July 19, 2004 Share Posted July 19, 2004 So how does it perform? It's hard to comprehend a gen 1 Brat screaming! The Brat grahpics in place of the STI is great! Looking good! Glenn 82 SubaruHummer 01 Forester Link to comment Share on other sites More sharing options...
iluvdrt Posted July 19, 2004 Share Posted July 19, 2004 thanks, answers for you iluvdrt, -Pipes are stainless mandrel bends from Jegs garner Are they a custom order job, or things you pieced together? How much did the pipes, and joiners cost you, if you don't mind me asking? Link to comment Share on other sites More sharing options...
All_talk Posted July 19, 2004 Share Posted July 19, 2004 Yes, very nice work, clean. And the "BRAT" is a great touch. Gary Link to comment Share on other sites More sharing options...
MorganM Posted July 19, 2004 Share Posted July 19, 2004 mmmm...turbo radio flyer Link to comment Share on other sites More sharing options...
spanky_pete Posted July 19, 2004 Share Posted July 19, 2004 Oh my, I think I'm in love. Link to comment Share on other sites More sharing options...
garner Posted July 19, 2004 Author Share Posted July 19, 2004 So how does it perform?It's hard to comprehend a gen 1 Brat screaming! The Brat grahpics in place of the STI is great! Looking good! Glenn 82 SubaruHummer 01 Forester I still have a bit of tuning to do. It seems like I occasionally, at random hit something that feels like boost cut at lower rpms. It's like hiting a wall. I'm guessing the fuel pressure can't keep up at times. When it works, it definately screams, as in breaks loose big time. I have to get front axles custom made so it's rear wheel drive now. Going to have to put some concrete in the bed to be able to hook up.... iluvdrt, the mandrel bends are here: http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=1327&prmenbr=361 and the silicone tubes are here: http://www.hosetechniques.com/mainframe.html the rest of the intercooler set up is made of some stock wrx bits and a modified samco y-pipe. I won't tell you what I spent because I don't, nor do I want to know.... spanky_pete, hands off my woman! garner Link to comment Share on other sites More sharing options...
Craven Posted July 19, 2004 Share Posted July 19, 2004 Very Nice Link to comment Share on other sites More sharing options...
wagonpowaa Posted July 19, 2004 Share Posted July 19, 2004 dude that is sick like pnuemonia. and I hope its contageous! cuz damn! Link to comment Share on other sites More sharing options...
WJM Posted July 20, 2004 Share Posted July 20, 2004 SWEEET. Link to comment Share on other sites More sharing options...
mcbrat Posted July 20, 2004 Share Posted July 20, 2004 very nice!!! Link to comment Share on other sites More sharing options...
subyrally Posted July 20, 2004 Share Posted July 20, 2004 i think i need a towel, wait, now i know i need a towel. i now know what i should try for my next project. are you running stock ea82t injectors? what about fuel management? grrrr, i want Link to comment Share on other sites More sharing options...
Subarutex Posted July 20, 2004 Share Posted July 20, 2004 A fine piece of work. Link to comment Share on other sites More sharing options...
baccaruda Posted July 20, 2004 Share Posted July 20, 2004 AAARGH my skin is pale sickly green from jealousy!!! all these cool one-off custom subarus running around and the general public has no idea, heh heh what about a smaller master cylinder from a different car, or relocating the battery to the back for weight? Link to comment Share on other sites More sharing options...
Vegablade Posted July 20, 2004 Share Posted July 20, 2004 have you run this on a dyno yet?, if not you should, figure out how much horse power and torque this thing is pushing. Link to comment Share on other sites More sharing options...
garner Posted July 20, 2004 Author Share Posted July 20, 2004 i think i need a towel, wait, now i know i need a towel. i now know what i should try for my next project. are you running stock ea82t injectors? what about fuel management? grrrr, i want yes, stock injectors for now, stock ecu for now as well. megasquirt and megajolt bits on the way....bigger injectors and fuel rails to come. It seems I have fuel issues....... baccaruda, the battery is under the bed, behind the passenger seat, wouldn't fit under the hood...thats the ea82t master cylinder with the ea71 vacuum assist.... Link to comment Share on other sites More sharing options...
78TurboBrat Posted July 20, 2004 Share Posted July 20, 2004 Garner, I have to give it to you all hands down. You make my 78 turbo brat look like its nothing compared to yours, but how do you like hittin second gear and third ? well worth the time i would say. now i just need to come up with some more time and go into mine and get it all souped up but i dont think i am going to go with the intercooler as i am going to keep the spare tire location. Fixing to start another project "Thanks to Caleb" its a 87 or 88 wagon with an ej22 mated to a 5 speed d/r 4wd. But i dont know if i will use the wagon or the 83 brat yet. ] But again, very nice work. wish i had taken the time to do all that, but if you stomp a mustang and show him your motor, he's going to know its modified. as with mine it looks like its all stock like it came that way. and they just look at you funny wanting to know where they can get one. Link to comment Share on other sites More sharing options...
bajavwnsoobnut Posted July 20, 2004 Share Posted July 20, 2004 Daymn man that is cool lookin now to think of what can I do to the 76 if I want to do the cutting to the hood and the (GASP) Frame rails Link to comment Share on other sites More sharing options...
rallyruss Posted July 20, 2004 Share Posted July 20, 2004 dam yo... thats gona be one pimp ***** ride. nice job. hope we(you ) can get that motor running well soon. I am itching to put my TDO4 on now. Link to comment Share on other sites More sharing options...
garner Posted July 20, 2004 Author Share Posted July 20, 2004 78turbobrat, Yep, the scoop and such loose the sleeper effect. then again the way this thing sounds with the cams, bigger turbo, exhaust, no way would anyone think it was stock....I'm still having some fuel delivery issue so 2nd and 3rd don't always pull smooth, I can guess it will be really loony toons crazy once she's all dialed.. bajavwsoobnut, get cuttin!! I think I know what your feelings are. I felt kind of bad cutting on a gen one, they are pretty rare and not getting any more common. I guess that's part of the reason I had to do the best fab job I could, (the other reason being the perfectionist thing....) Rallyruss, the only issue I'm having is what seems to be something like fuel cut similar to the over boost safety cut out. This thing happens kind of randomly, generally after a good strong pull in 1st and starting a pull in second. Its like I hit a wall, let of the gas and get on it again and usually it goes. I'm guessing the fuel can't keep up... Perhaps I'll take this issue to subarutex's "ea82t tuning geniuses.... thread. by the way, I don't think the TDO4 is a bad match for the ea82t, It seems to be a little laggy but starts to spool pretty good at 2500-3000 and pulls like a mofo. I think the monster tdo4 tratment would be good and I would seriously consider clipping and getting the shaft as balanced as possible to aid in spool up. A better header would help too. garner Link to comment Share on other sites More sharing options...
iluvdrt Posted July 20, 2004 Share Posted July 20, 2004 iluvdrt, the mandrel bends are here: http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=1327&prmenbr=361 and the silicone tubes are here: http://www.hosetechniques.com/mainframe.html the rest of the intercooler set up is made of some stock wrx bits and a modified samco y-pipe. I won't tell you what I spent because I don't, nor do I want to know.... garner Thanks, I may have try some things...... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now