subiemech85 Posted July 29, 2004 Share Posted July 29, 2004 what should be replaced when the engine is out? besides the transmission Link to comment Share on other sites More sharing options...
mcbrat Posted July 29, 2004 Share Posted July 29, 2004 rear main seal front crank seal valve cover gaskets oil pan gasket wouldn't touch the intake gaskets if your not doing any work there.... check PCV valve and EGR Link to comment Share on other sites More sharing options...
Scoobywagon Posted July 29, 2004 Share Posted July 29, 2004 I would advise you to change out anything made of rubber or cork. Hoses, belts, valve cover gaskets, front and rear main seals, oil pan gasket, clutch, every filter you can lay your hands on... You get the idea. Link to comment Share on other sites More sharing options...
MilesFox Posted July 29, 2004 Share Posted July 29, 2004 scrape away any crud on the crossmember and clean out the engine compartment really good Link to comment Share on other sites More sharing options...
subiemech85 Posted July 30, 2004 Author Share Posted July 30, 2004 I "steam cleaned" all grease on the engine and engine bay, and hot water flushed the cooling system I think it's time to replace the oil pump seals, as there was a line of oil on the oil filter changed the water pump, spark plugs, and valve cover gaskets, and adjusted valves when it was in I have the cleanest truck in my area driveshaft and transmission comes out friday, and rebuild the engine and transmission mounts this weekend Link to comment Share on other sites More sharing options...
86subaru Posted July 30, 2004 Share Posted July 30, 2004 go to any auto web site Link to comment Share on other sites More sharing options...
subiemech85 Posted July 30, 2004 Author Share Posted July 30, 2004 go to any auto web site for what? Link to comment Share on other sites More sharing options...
86subaru Posted July 31, 2004 Share Posted July 31, 2004 the answer to your question , you could stop by any auto parts store and ask them Link to comment Share on other sites More sharing options...
subiemech85 Posted July 31, 2004 Author Share Posted July 31, 2004 I still don't understand what you mean! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now