BlueRidge Posted March 3 Share Posted March 3 Good afternoon! I've found the rodent damaged wires, it's on the four-wire plug leading into the passenger side fuel injector port. I'm guessing it's the fuel pressure sensor. The rodent not only chewed through the wires but it took off with a three inch strand. I'm looking at needing to splice in a replacement wire. I have no clue what gauge wire will be needed for the splice. It's stranded wire. I've attached a picture below - any knowledge on this wire gauge? Thanks in advance Link to comment Share on other sites More sharing options...
brus brother Posted March 4 Share Posted March 4 I'm only guessing 18 gauge. Take wire to HD or Lowes and compare size with wire stripper? Link to comment Share on other sites More sharing options...
czny Posted March 4 Share Posted March 4 https://wetechnologies.com/technical-info/Stranded Wire Chart.pdf Compare your wire to fractional small drill bits to gauge the wire, if you don't have inch calipers. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now