[HTi]Johnson Posted August 10, 2004 Share Posted August 10, 2004 Ok. Would an EA81 3AT 4WD driveline and crossmember fit in place of an EA81 4spd D/R 4WD driveline and crossmember? Quote Link to comment Share on other sites More sharing options...
78TurboBrat Posted August 10, 2004 Share Posted August 10, 2004 I know its not completely related, but i did take a 3at from an 87 turbo wagon and put it into a 83 brat that needed a tranny desperately. the only thing i saw was that the crossmember from the brat had to be used and that the mounting holes were different, so i had to drill new ones in the brat crossmember. again though this is going from a ea82t to an ea81 and a wagon to a brat, but everything else was fine. Quote Link to comment Share on other sites More sharing options...
[HTi]Johnson Posted August 10, 2004 Author Share Posted August 10, 2004 and bump Quote Link to comment Share on other sites More sharing options...
baccaruda Posted August 10, 2004 Share Posted August 10, 2004 should fit fine, you'll need linkage and console and electronics and a radiator that accepts the lines to cool the trans (or else mount a cooler somewhere else), maybe other stuff? i don't know much about the autos. also a pedal rack. Quote Link to comment Share on other sites More sharing options...
[HTi]Johnson Posted August 10, 2004 Author Share Posted August 10, 2004 I was wanting to take the 3AT out and put the 4spd MT in Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted August 10, 2004 Share Posted August 10, 2004 Yes, but you also need the leading rod plates, and the cross-member, as the A/T isn't he same. Pedal box, clutch cable, flywheel, clutch, interior consoles, shift linkage, etc, etc GD Quote Link to comment Share on other sites More sharing options...
[HTi]Johnson Posted August 11, 2004 Author Share Posted August 11, 2004 driveline and 3.9 rear diff, also? Quote Link to comment Share on other sites More sharing options...
![[HTi]Johnson](https://www.ultimatesubaru.org/forum/uploads/profile/photo-thumb-2784.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.