ThosL Posted August 22 Share Posted August 22 2002 Forester; I found the source of the metal grinding noise; I changed out the brake pads and the driver's wheel was very wobbly. Replaced it with a used hub/knuckle a year and a half or so ago. Probably will look for another as my experience with pressing in new bearings has not been good. Link to comment Share on other sites More sharing options...
ocei77 Posted August 22 Share Posted August 22 Either that or Chinese. from places like Detroit Axle. Link to comment Share on other sites More sharing options...
lmdew Posted August 22 Share Posted August 22 Yep, I always go used hub. I check them the best I can at the yard. Pull, Install, should last for years. If it turns out to be bad, exchange and get another. Used WRX s hubs are also good as many of the nasioc members pull them to upgrade. 1 Link to comment Share on other sites More sharing options...
ThosL Posted August 22 Author Share Posted August 22 I assume the Durago unit on Amazon is not a great choice, people complain about it not including seals, etc.. https://www.amazon.com/dp/B00LFL8JDI?ref=ppx_yo2ov_dt_b_fed_asin_title Junk yard will be my choice, will check Rock Auto Link to comment Share on other sites More sharing options...
ThosL Posted August 22 Author Share Posted August 22 The local junk yard wants $125 for a spindle; I probably got the one that failed from them, so no dice on that. Link to comment Share on other sites More sharing options...
el_freddo Posted August 23 Share Posted August 23 What’s so difficult about replacing the bearings? It helps to have a mate that’s got a press - that’s a must for this job! The rest is very much the same as any other bearing replacement. And you know what sort of quality bearing you’re replacing it with since you’re the one purchasing the bearing and installing it. The used hub method has its merits. I reckon there’s a point where you get over hunting down a used hub and collecting dead ones on the shelf. All the best with it! Cheers Bennie 1 Link to comment Share on other sites More sharing options...
ThosL Posted August 26 Author Share Posted August 26 The mechanic who put it in originally replaced the faulty wheel bearing and ball joint with new parts today; would not take any money for it beyond the parts. That's an impressive honor code. Carquest was over $40 on upper front ball joint wholesale, $65 retail. No wonder Rock Auto is so popular. Link to comment Share on other sites More sharing options...
lmdew Posted August 29 Share Posted August 29 Hard to find folks like that. Send more work his way! 1 Link to comment Share on other sites More sharing options...
wtdash Posted September 10 Share Posted September 10 Yeah...used knuckle FTW, in my experience. And Subaru used the same one on many vehicles, esp. the front. There was change around '02 in how the ABS sensor was mounted (and the tone ring), and they're not easily interchangeable. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now