boing Posted August 10, 2004 Share Posted August 10, 2004 Hi, I'd like to know if there is a way to convert the way the high beams come on. Right now when I go to high beam the low beam lights go out and I'd like to know if you can run these (and how) so that all 4 bulbs are lit when on high. I've seen this question before but I dont' think it was ever answered. I have..... 1988 GL 3-door w/throttle body and Overhead cam. I'd be grateful if somebody has a light switch or something that would allow all the lights to come on. boing Link to comment Share on other sites More sharing options...
calebz Posted August 10, 2004 Share Posted August 10, 2004 GL with 4 headlights? Link to comment Share on other sites More sharing options...
rallyruss Posted August 10, 2004 Share Posted August 10, 2004 if its a gl. you have 2 filiments in each bulb. running both at the same time would really shorten the bulb life. you could use a relay or 2 to do it but I would not recomend it. just get a decent set of driving lights. Link to comment Share on other sites More sharing options...
boing Posted August 11, 2004 Author Share Posted August 11, 2004 You're right.. I have a GL and it only has single lights but dual elements. Ok. Thanks a bunch.. I can add some fog lights and I'll be good to go. boing Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now