oddcomp Posted August 13, 2004 Share Posted August 13, 2004 where is a good place to order tight radius bends that don't cost alot? in steel so i can install this ford thunderbird intercooler i got Link to comment Share on other sites More sharing options...
GLCraig Posted August 14, 2004 Share Posted August 14, 2004 I don't know of any place to order the tube you need. But have you tried going to the muffler shop and seeing if they can bend up what you need? Link to comment Share on other sites More sharing options...
Warp3 Posted August 14, 2004 Share Posted August 14, 2004 I agree with Craig...I'd say a muffler shop or finding some pre-bent exhaust tubing (which auto parts stores carry) will be your best bet. Link to comment Share on other sites More sharing options...
JWX Posted August 14, 2004 Share Posted August 14, 2004 why not just use silicone bends? seems easier to me (but not sure if you can, just thought I'd but it out there) Link to comment Share on other sites More sharing options...
oddcomp Posted August 14, 2004 Author Share Posted August 14, 2004 oh yeah wasted 20 bux on exhaust shop bends.. sadly the actual bend "radius" is not tight enough hmm i may have to use weld el's since they can be had in really tight angles .. i just figured since many have intercooled their turbo's that at least a few have run into piping problems i can get a few on ebay.. but they ae aluminum and since i can't weld aluminum "lack of proper tools" i am stuck with steel hmm the search continues Link to comment Share on other sites More sharing options...
lastchance Posted August 14, 2004 Share Posted August 14, 2004 The tight radius silicone bends are super expensive...Well, at least 20 bucks more expensive then the piece I used. Here's a little secret I found...I needed to use one for isntalling my WRX TMIC... http://www.roadraceengineering.com/mandrelbends.htm Scroll to the very bottom under cast aluminum bends..2.25" 90 degree I guarantee that's thee tightest bend you'll find, but if you are looking for mandrel bent steel or aluminum (not cast) then check out these guys...I was trying to get some people together to buy like 10 intercooler tubing sets from these guys, but no one wanted to do it. I was thinking it'd be cool to pre order all the piping needed to install a Saab 900, WRX, or T-bird TMIC so when someone wanted to install an intercooler, I could just be like here's everything you need! http://www.woolfaircraft.com/elbow.htm Later, Dan Link to comment Share on other sites More sharing options...
oddcomp Posted August 14, 2004 Author Share Posted August 14, 2004 cool thanx i will go check em out now Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now