JWX Posted August 14, 2004 Share Posted August 14, 2004 what a differnce it made, I thought my clutch was going (finaly ) but it was just the cable out of adjustment from streching (I replaced it about 6 months ago). I also adjusted my hill holder and it works, but it works on level/semi-level ground. Did I adjust it to much? (I say level/smei-level cause you can't really feel or hear it but when I'm at stop lights and take my foot of the brake pedal it doesn't start rolling back till I let the clutch out) Link to comment Share on other sites More sharing options...
MilesFox Posted August 14, 2004 Share Posted August 14, 2004 get the clutch cable how you like it, however high you like your pedal, and then adjust the hill holder. dont make the hill holder too tight or it will drag the brakes when you try to take off Link to comment Share on other sites More sharing options...
JWX Posted August 14, 2004 Author Share Posted August 14, 2004 right, I have the clutch adjusted how I like it. just seeing if I adjusted the HH to tight Link to comment Share on other sites More sharing options...
GeneralDisorder Posted August 14, 2004 Share Posted August 14, 2004 Are you *sure* the cable was routed correctly? The only time I've had them "stretch" is right before they snap.... GD Link to comment Share on other sites More sharing options...
baccaruda Posted August 14, 2004 Share Posted August 14, 2004 yes, the HH is too tight. find a hill to practice adjusting it on. i've had two clutch cables fail, one was in the sheath, and one TWANGED at the pedal as the strands of the cable snapped one by one. that one lasted long enough to get to the dealership to get a new one! Link to comment Share on other sites More sharing options...
JWX Posted August 14, 2004 Author Share Posted August 14, 2004 YES! I'm sure the cable is routed correctly (me and skip went round and round about this when I went to replace it). And the HH doesn't drag, (I’ve got no more drag then I used to have) it just holds on pretty much level ground. So that’s too tight then? And I think it was mentioned in HTKYSA that you should re-adjust them after a couple hundred miles. Not too mention it feels just like it did when I installed it now. Link to comment Share on other sites More sharing options...
All_talk Posted August 14, 2004 Share Posted August 14, 2004 The HH cable adjustment controls where in the clutch peddle travel the valve activates, I have mine adjusted so that it only catches at full peddle travel, well beyond clutch disengagement, this way I can choose when I want to use it. The angle required to activate that valve is adjusted by shimming the front or back of the HH valve mount, if yours is working on flat or near flat ground you should add a shim to the back or remove one from the front, the adjustment procedure is in the manual. Hope that helps. Gary Link to comment Share on other sites More sharing options...
DerFahrer Posted August 14, 2004 Share Posted August 14, 2004 The angle required to activate that valve is adjusted by shimming the front or back of the HH valve mount, if yours is working on flat or near flat ground you should add a shim to the back or remove one from the front, the adjustment procedure is in the manual. Excellent tip. I never thought of that. My XT's HH works intermittently, and it's a brand-new valve. That very well could be the problem. Link to comment Share on other sites More sharing options...
JWX Posted August 14, 2004 Author Share Posted August 14, 2004 well, I was just out for a drive and my hill holder was back to normal, it wasn't working. so never mind I guess. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now