nails24 Posted August 26, 2004 Share Posted August 26, 2004 I went to check the oil, I pulled the hood un-latch, and it brought with it a foot of cable. Finally, I pulled the whole thing out in one fatal drag. So, how do I open my hood now ? I could probably do it by demolishing the grill, but I would like to save it. The latch mechanism seems rather sealed up from the front side to prevent thiefs from opening it up. Can I get at it manually ? 87 GL-10 Turbo 5-speed. Thanks, Chad L Oshkosh, WI Link to comment Share on other sites More sharing options...
MorganM Posted August 26, 2004 Share Posted August 26, 2004 Get the grill off. Then you can stick your hand behind the latch between tye AC condenser (if you have one) and the latch itself. Its a REALLY tight fit; I have pretty long/skinny fingers so that helped. On the drivers side of the latch; trace how the cable comes into the latch mechanizm. Then just pull on the latch where the cable is attached to it. Also helps to have your other hand pushing down onto the hood to relieave some pressure on the latch. Good luck Link to comment Share on other sites More sharing options...
All_talk Posted August 26, 2004 Share Posted August 26, 2004 I haven't had a cable on my '87 wagon for some time now (guy at the tire shop pulled it out for me :-\ ), I just reach up under the bumper and trip it with my finger, no A/C though. I should see if it can be done on my RX with A/C, just in case. Gary Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now