timn29 Posted September 2, 2004 Share Posted September 2, 2004 I have 98 OBW that has a peculiar problem. I have experienced my headlights vibrating or working themselves loose to the point of going out. My driver's side has done it twice (the first time I went to replace the bulb and as soon as I touched it to disconnect the plug the light came back on) and last night it happened to my pass. side all I had to do was tap the plug (under the hood) with my hand and the headlight came back ON...weird. Link to comment Share on other sites More sharing options...
Commuter Posted September 2, 2004 Share Posted September 2, 2004 I have a connection "challenge" with mine on my 97 OB, but, I'm running higher wattage bulbs. The additional heat causes the collection to loosen. But the plug does not physically work off of the prongs. I have the H4 bulbs. I think you have the 9007s? I've poked a small screwdriver (or file handle tip) into the connector to squeeze the metal connector together. It helps for a while. (Note - I'm not inserting where the male blade connector goes, but outside of the female connector part.) Recently, I've just simply bent the prongs of the bulb a bit. It seems to work. I've considered actually twisting them a little to get even better grip, but I just haven't gotten around to it. I never had any issue when I was running regular wattage bulbs. Commuter Link to comment Share on other sites More sharing options...
rcoaster Posted September 2, 2004 Share Posted September 2, 2004 Link to comment Share on other sites More sharing options...
timn29 Posted September 2, 2004 Author Share Posted September 2, 2004 those are some good solutions I didn't even think about...glad I'm not the only one with this weird problem. The H4's? How do they differ from stock? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now