Mr. Carb Posted September 12, 2004 Share Posted September 12, 2004 I think I have a bad cone washer, or I may have the other washer on incorrectly. Thought I'd double check to make sure there isn't other possibilitys. But on my passenger side front hub, ever sense I did the brakes that side has had the brakes rubbing on it as if the roter was warped. However it isn't warped. So I know somehow the hub is lose, it gets alot worse when I turn left and put side weight pushing against that wheel. So I'm just making sure the only possible cause could be the cone washer, are there any other causes for this I may have missed? thanks for the input. Link to comment Share on other sites More sharing options...
TomRhere Posted September 12, 2004 Share Posted September 12, 2004 Onliest thing I know is; any and every time I've had to remove the axle nut and associated parts, I've always had to re-torque the axle nut within a 100 miles or so. Kindly like somet'n ain't seat itself right. But I really don't have an answer for that one. Link to comment Share on other sites More sharing options...
Mr. Carb Posted September 12, 2004 Author Share Posted September 12, 2004 yeah, I already retorqued it. I sat and thought about it, I think it might have something to do with the break caliper being on it at the time of crank down, because I always torqued it when the e-brake was on.I'm gonna pull it off tonight, examine the washers, if need to be replaced, will replace, put back on, drop car down, torque it down without the e-brake on... (the tire will be on the hub at the time) then I'll lift it back up and take the tire back off so I can put the pin back in Link to comment Share on other sites More sharing options...
Mykeys Toy Posted September 13, 2004 Share Posted September 13, 2004 Does it sound like it is binding, and is worse when the car has been sitting for a few hours? Mike Link to comment Share on other sites More sharing options...
Mr. Carb Posted September 13, 2004 Author Share Posted September 13, 2004 no it's actually not doing it at all when the car sits, it gets bad say after a freeway run. But I descovered what it was, the washer for the cone washer was on backwords.... but sense it's been dragging on the brake all this time, the rooter is warped now. So time for a new rooter. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now