Jump to content
Ultimate Subaru Message Board

Recommended Posts

I have a '00 OBW with Phase II 2.5 with 61K miles. When I changed my coolant about a month ago I went and got a bottle of the new magic additive from the dealer. I changed the coolant and put the additive in figuring I could show the receipt and get the dealer to sign off on it. No dice.

 

Called SOA and the agent said no problem, got my VIN and said it was entered into my files. He called back the next day and said he couldn't do it.

 

My question is would it be harmful to go to the dealer and get them to dump in another bottle of the additive?

 

Or should I just change out my new coolant and then go to the dealer?

Link to comment
Share on other sites

Hi,

 

I'm a bit confused - sounds like you have fresh coolant with the correct additive. Why would you want to drain it and have the dealer do it over again?

 

I don't think adding a second bottle is a good idea as it may impact the ability of the coolant to flow well.

 

Regards,

Adnan

Link to comment
Share on other sites

If you get the dealer to sign off that the additive was used you get the warranty on the HG extended to 100K miles. My dealer won't do that unless they dump the additive in themselves. Unfortunately they won't do it in 15 minutes, they want the car all day with no courtesy service. That is the reason I did it myself in the first place.

Link to comment
Share on other sites

I want to know what it is!!!

 

What does the stuff look like?

does it look like real fine chew or shredded tree bark?

or is it a liquid (pink maybe?)?

 

If it's the pink liquid you will be fine with 2 or even 3 doses... it's just redline water wetter. I swear by the stuff.

Link to comment
Share on other sites

If they arent gonna sign off on it (and it sounds like you tried hard to get them to) then you gotta let them do it. I wouldnt do anything more; just bring it in and say "drain the coolant, add new coolant, add your bottle of junk, and SIGN OFF ALREADY" They are honestly just wasting your time on a technicality.

Link to comment
Share on other sites

I used this magic fluid in my turbo XT, and it solved the mini leak (it was leaking at some hose fittings where some corrosion had taken over)

 

it works!! and I use it at work on cars coming in for their service (i work at a Subaru dealer) and one car came in leaking coolant from the head gasket! (fresh and dripping)

 

so we added the additive, (in less than 15 minutes!) and i took it out on the freeway for 5 miles... then rechecked it, and the leak was repaired!! it is wonderful additive!!!

 

i belive that one or 2 doses in the same batch wont hurt much.. its not too thick as far as a clogger... (not like alumakiller)

Link to comment
Share on other sites

This is for Brus Brother. I had the same question since I own a auto repair shop. No you do not have to have the dealership reinstall the additive every time you change the coolant. The first time the put it in the computer, and put the sticker on. Everytime after that you, have to added the additive whenever you change the coolant and keep a record of it.

 

 

For example, customer comes in with 45k miles (already has had 30k service) I tell them about the recall. They go to the dealership (against their will, "I though I brought my car to you guys so we would never have to see the dealer again") tdealer install the additive. At 60k when the service is due. We flush the cooling system and add the additive, making sure that it is noted on their invoice. Extended headgasket warrantee still intact.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...