jwikan Posted September 28, 2004 Share Posted September 28, 2004 My fan just went out in my 87 subaru GL wagon. I have a feeling its not the motor itself as it was shutting on and off before like a loose connection. I would give the dash a good wack and she would fire back up. Questions: 1.) How do I get the instrument panel off to get to the switch? 2.) Where are the contacts to test power right at the blower fan itself? (Are they easily accessable?) 3.) Am I correct in assuming its the switch because all speeds quit working? 4.) If it is the fan (blower) which side is it on for this model of car. My manual is a bit confusing it lists Loyal but no GL wagon on this issue. please e-mail me if you know, thanks jon jonwikan@earthlink.net Link to comment Share on other sites More sharing options...
roxtar Posted September 28, 2004 Share Posted September 28, 2004 welcome to the board don't know all that much about the heating/ac systems... but if the GL is the same as the Loyale (and i think it is) then the blower and relays and all that stuff should be passenger side, kinda under the glove box. as far as the controls and switches go, you need to pry off the fan speed selector knob and the defrost button (both right hand side of instrument panel) in order to get to the screws you need to get to the switches. Link to comment Share on other sites More sharing options...
pwoens Posted September 28, 2004 Share Posted September 28, 2004 just remember if it seems like it wont come off by prying on it, then there is most likely a screw hiding somewhere. It does sound like a loose connection somewhere though?? Maybe a burnt wire or just a bad control unit?? Link to comment Share on other sites More sharing options...
jwikan Posted October 6, 2004 Author Share Posted October 6, 2004 Hey guys, FYI...I took the inst. panel off. There are 8 skrews, many more than my manual says and some a bit tricky to find. Then I realized that I was getting 12+ volts to the fan moter under the glove box..... 3 skrew/bolts takes the fan out on the 87 GL wagon. I took apart the moter (2 skrews) and it was full of condesation mold dirt....yuk.....I cleaned her up with wd-40 and a wire brush and it runs perfectly!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now