JonOfScio Posted October 1, 2004 Share Posted October 1, 2004 Besides standard sockets, wrenches, the wrist pin puller, and some hex socket pieces... what else? Link to comment Share on other sites More sharing options...
canajun2eh Posted October 1, 2004 Share Posted October 1, 2004 You'll need a pair of long needle-nosed pliers to remove the spring clips that hold the wrist pins in the pistons. Link to comment Share on other sites More sharing options...
ccrinc Posted October 1, 2004 Share Posted October 1, 2004 A BFH, dead blow of course. Emily http://www.ccrengines.com Link to comment Share on other sites More sharing options...
Snowman Posted October 1, 2004 Share Posted October 1, 2004 Just make sure you get ALL the bolts out first! Both times I've had a block apart, I forgot one bolt, smacked the thing forever, then checked to see if there were still some bolts in there, took the bolt out, and it came apart nearly by hand. Link to comment Share on other sites More sharing options...
oddcomp Posted October 2, 2004 Share Posted October 2, 2004 or my tool of choice .. c4 plastique yay!! Link to comment Share on other sites More sharing options...
JonOfScio Posted October 2, 2004 Author Share Posted October 2, 2004 I'd rather work with a BFH than C4. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now