lizkeljack Posted October 10, 2004 Share Posted October 10, 2004 I have a 2000 Subaru Forester AWD Automatic which flashed the AT Oil Temp light at me while I was on the road. Now this morning, I drained off a few quarts of AT fluid because it smelled burnt. Then I added a few quarts. The light has stayed off since yesterday ... but now: 1. Do I check the AT levels while it's running in neutral? OR 2. Do I check it with the engine off? Any help greatly appreciated! Link to comment Share on other sites More sharing options...
Legacy777 Posted October 10, 2004 Share Posted October 10, 2004 To check AT fluid level, warm up the trans/car to normal operating temp. Park on level surface, cylce the gear shifter slowly from park to 1 and then back to park, leave car running, and then check fluid level Link to comment Share on other sites More sharing options...
NorthWet Posted October 10, 2004 Share Posted October 10, 2004 To check AT fluid level, warm up the trans/car to normal operating temp. Park on level surface, cylce the gear shifter slowly from park to 1 and then back to 1, leave car running, and then check fluid level YIKES!!! What a bad time for a typo to creep in! ---> PARK <--- It should have read "... and then back to PARK,..." ATF levels are checked like Legacy777 said, but check is done in PARK for safety reasons. Pat Link to comment Share on other sites More sharing options...
cookie Posted October 10, 2004 Share Posted October 10, 2004 for you on the trip home. Link to comment Share on other sites More sharing options...
Legacy777 Posted October 10, 2004 Share Posted October 10, 2004 fixed typo Link to comment Share on other sites More sharing options...
lizkeljack Posted October 10, 2004 Author Share Posted October 10, 2004 you know, i actually figured it was a typo and automatically sort of substituted the word park ... but APPRECIATE SO MUCH all the info ... and especially the wishes for a safe ride home ... keep your fingers crossed, indeed! THANK YOU! betsy Link to comment Share on other sites More sharing options...
Wayne Boncyk Posted October 11, 2004 Share Posted October 11, 2004 Good luck! Let us know what happens.... Link to comment Share on other sites More sharing options...
Tiny Clark Posted October 12, 2004 Share Posted October 12, 2004 Are you towing with your forrester, or live in extremely hilly terrain? Seems kind of odd to me that the AT fluid shows signs of burning on a vehicle this new. I would drain it again and do another refill to get more fresh fluid into it. Link to comment Share on other sites More sharing options...
cookie Posted October 12, 2004 Share Posted October 12, 2004 and she can get the oil and tranny filter changed at her leisure. I agree it would not be good to flash codes on such a new car. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now