birdfalk Posted October 15, 2004 Share Posted October 15, 2004 Whats the trick for getting the window cranks off to remove the door trim on a 1995 Impreza sedan? Anything else I should know before pulling the trim to install new speakers? Thank you. Link to comment Share on other sites More sharing options...
Setright Posted October 15, 2004 Share Posted October 15, 2004 My imp has power windows so this is no definite, but the standard technique on most Japanese cars to wrap a cloth around the base the of the window crank and pull! Wear safety goggles or look the other way, the circlip that holds the crank in place will go flying! The "sail" inside the door mirror housing must be pried out to allow the door skin to be lifted off. There are at least two screws behind blanking plates that hold the skin secure. Pry carefully, with fingers or broad wooden tool around the edges of the door skin to release the plastic rivets. Link to comment Share on other sites More sharing options...
Dr. RX Posted October 15, 2004 Share Posted October 15, 2004 There is a clip that holds it on and a plastic disc that seems to hide it. I use a screw driver (small one)to pry the plastic disc back, then push on one end of the clip. It usually backs off the handle, then you can easily pull the handle off. Link to comment Share on other sites More sharing options...
birdfalk Posted October 15, 2004 Author Share Posted October 15, 2004 Thanks, I got the handel off. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now