shanonsf Posted October 24, 2004 Share Posted October 24, 2004 hey all, it's been awhile, 1st time at this "new" board..... anyway, I'm gettin' a ticking (disconcerning) from rear wheels when cornering. (BTW: 82 GLW wagon, 4wd DR, KYBs & rear discs) Sounds almost like the wheel are flexing and clipping calipers or ???!! It has new rear wheel bearrings about a year old now done by a rebutable pro..... gonna take a peak and check some bolts, any suggestions on what/where to look appreciated!! shanonsf 82 GLW "Snow White"...manipulated.....;-) Link to comment Share on other sites More sharing options...
PeterD Posted October 24, 2004 Share Posted October 24, 2004 could be the CVs...possibly Link to comment Share on other sites More sharing options...
AlpineRaven Posted October 24, 2004 Share Posted October 24, 2004 Jack the Scoob up and wriggle around on the wheels to see if there is large movements, take the wheel off and check the brakes & calipers also check if there is any movements as well and yes check the bolts as you might've missed something.. last thing would be the CVs that could be worn out?? Cheers Tristan Link to comment Share on other sites More sharing options...
Vegablade Posted October 24, 2004 Share Posted October 24, 2004 sounds like a cv, mine did that for a long time, only when turning, got really bad then i busted that axle out, now when i turn it doesnt click anymore. Link to comment Share on other sites More sharing options...
dptyrob Posted October 24, 2004 Share Posted October 24, 2004 Like these guys said, jack it up and see if you got any play in the wheels. Then pull the wheels and make sure your calipers are still bolted on securely. It may very well be just common disk brake noise, curable with some disk brake/pad lubricant. Have you done brakes lately? I'm not a subaru expert, but I've owned other FWD cars, and the only time I got CV noise was when cornerning. I believe that's because the wheels were turned and that put the CV at an odd angle. Your rear CV's shouldn't experience much of that in cornering. Link to comment Share on other sites More sharing options...
shanonsf Posted October 25, 2004 Author Share Posted October 25, 2004 hey there, thx for the replies. went thru the various brake & control arm bolts and there good. clicking has deminished but still present under hard cornering. only seems to be the right rear. the axel shaft can slide sideways @ 1" in travel, is the excessive, is the CV blown? -shanonsf 82 GLW "Snow White".....manipulated Link to comment Share on other sites More sharing options...
swisscheese Posted October 25, 2004 Share Posted October 25, 2004 Check the big central axle nut on the outside (32 or 36mm) Mine was loose despite the cotter pin being in place and the wheel rubbed the caliper. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now