Jump to content
Ultimate Subaru Message Board

lift is done... now I can't shift!


singletrack
 Share

Recommended Posts

Ok, so i got the lift in - It was a bear. But it's done, it's solid, the car is siting on its wheels.

 

I just took it for a test drive, and everthing was more or less ok.

 

But I can't hit third gear! It doesn't want to stay in 1st either. Second, forth are fine, as is reverese. I didn't try 5th but im guessing it won't work either.

 

I also didn't try 4x4.

 

Anywho, I guess its the shift linkage, but I dunno what the hell I'm doing at this point.

 

A lil' help, PLEASE!

 

Oh yeah: 88 SPFI EA82 3" lift

Link to comment
Share on other sites

This seems to be the dirty little secret of subie lift kits. I built my own kit for my EA-81 and had similar problems once I got it all together.

 

I know you have an EA-82 but on the EA-81 you can heat and bend the shifter so you can hit all your gears.

 

Also on the EA-81, the 4wd lever linkage ends up pointing at an angle in normal 2wd and will pop the shifter out of reverse when you engage 4wd. I found that fabbing a modified linkage for that was absolutely necessary. That was with a 4" lift in a hatch.

 

Anyway, just know that it's normal and fixable, just take apart your console and boots and everything and have at it.

Good Luck!

Wish I could be more specific but I just know the EA-81s...

Link to comment
Share on other sites

Usually, the only shift difficulties come with the 4/3 kit. I haven't had feedback about the EA82s and that problem, but none the less, often with the kits the shift boot hampers movement and sometimes the boot hole requires some hammering just a wee bit to allow the shift rod full movement. Other have like Hatchmonster, heated and bent the shift rod a bit to do the same.

 

I can call you and discuss. r/ PK

Link to comment
Share on other sites

  OZified said:
Usually, the only shift difficulties come with the 4/3 kit. I haven't had feedback about the EA82s and that problem, but none the less, often with the kits the shift boot hampers movement and sometimes the boot hole requires some hammering just a wee bit to allow the shift rod full movement. Other have like Hatchmonster, heated and bent the shift rod a bit to do the same.

 

I can call you and discuss. r/ PK

The weird thing. . . I just put a 4/3 in my hatch. 0 problems shifting into any gear. Had to extend my front brake lines, but no shifting problems.

Link to comment
Share on other sites

  OZified said:
often with the kits the shift boot hampers movement and sometimes the boot hole requires some hammering just a wee bit to allow the shift rod full movement.
It's working fine now with the boot and plastic off. I guess I'll be trimming more than just fenders.

 

Everything is working, included 4x. I didn't try 5th, but I get the feeling that I won't ever use that gear again [with big tires] :)

Link to comment
Share on other sites

  singletrack said:
It's working fine now with the boot and plastic off. I guess I'll be trimming more than just fenders.

 

Everything is working, included 4x. I didn't try 5th, but I get the feeling that I won't ever use that gear again [with big tires] :)

 

My friend has a lifted hatch with a variation of a 3/3 or 4/3 lift, and still uses 5th. Custom console and shfter boot mods as well.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...