ezapar Posted November 7, 2004 Share Posted November 7, 2004 Bare hands and a little creativity with the BFH/"Subaru Tamer". <------------- befores ............afters--------------> Link to comment Share on other sites More sharing options...
JWX Posted November 7, 2004 Share Posted November 7, 2004 so you put those in your self? WTH Link to comment Share on other sites More sharing options...
ezapar Posted November 7, 2004 Author Share Posted November 7, 2004 so you put those in your self? WTHYeah, it pissed me off. No, the dents were from a week ago when I had to 4X it out of gnarlier stuff than a Soob should EVER have to be forced to manouver thru. (on the way in, a spider gear blew in the rear diff, left me with only one wheel getting any power in the rear) Tree and its big rump roast root did the damage. Link to comment Share on other sites More sharing options...
JWX Posted November 7, 2004 Share Posted November 7, 2004 oh ok I gotcha now, I was going to say if you don't want it I'll trade you mine for it. Link to comment Share on other sites More sharing options...
Turbone Posted November 7, 2004 Share Posted November 7, 2004 Hey, Qman may have some pics a little later of his escapades after the earleir X-Mas tree scouting run today. He brought the Brat by on the trailer, in the dark, and I could barely see it(you all know its silver). A local farm decided to let the crazies around here take a run thru the pumpkin patch. $100 if they could make it thru. I'll let him finish the story, with pics hopefully. Oh, and nice body work there Zap Link to comment Share on other sites More sharing options...
samo Posted November 7, 2004 Share Posted November 7, 2004 ^ I've got pics of the mud hole. I'll be posting them in a sec. Nice bodywork there, Erik ! Link to comment Share on other sites More sharing options...
idosubaru Posted November 7, 2004 Share Posted November 7, 2004 dude i got a drivers side door dent just like that. PLEASE provide details on how you did that. my door has stripping and decals that will never match the rest of the car if i just swap doors...plus the whole key thing is a pain as well. mine also has protective molding like that. i've pulled motors, trans....just about everything but i've never done jack with body work. TIPS PLEASE! Link to comment Share on other sites More sharing options...
ezapar Posted November 7, 2004 Author Share Posted November 7, 2004 dude i got a drivers side door dent just like that. PLEASE provide details on how you did that. my door has stripping and decals that will never match the rest of the car if i just swap doors...plus the whole key thing is a pain as well. TIPS PLEASE! I pulled off the panels inside the door to get access. Then, I used my bare hands to push the dents out from the inside. The door sill I had to beat with a piece of 2X4 and a hammer to bend it back down. Straightened out nicely. The door trim was pretty hammered too, so I bent it back into shape. The little plastic dealies that hold the trim on have to be pinched from the inside, they'll fall right off to be reused. Good luck. Link to comment Share on other sites More sharing options...
Mykeys Toy Posted November 7, 2004 Share Posted November 7, 2004 Pretty good work for a hammer and 2x4. Mike Link to comment Share on other sites More sharing options...
idosubaru Posted November 7, 2004 Share Posted November 7, 2004 awesome. thanks. i'll be doing that to mine. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now