baccaruda Posted June 15, 2005 Author Share Posted June 15, 2005 ungh. mine is going so slow. it's just hard to get out there for any meaningful amount of time. i haven't done any of that crap in my last post except for cutting the adapter plate. i am going to try to do the drilling before saturday, when i'm going out again to ... INSTALL THE LIFT KIT! finally. I should have one if not both of my new 92 Legacy GR2s ($45 shipped and $75 shipped, gotta love ebay!) by the end of the week ... I already have the WRX front springs, and I will hopefully have the WRX top spring perches by the end of the week as well. Link to comment Share on other sites More sharing options...
BeefaRu Posted June 18, 2005 Share Posted June 18, 2005 The radiator hoses are a pain just so you know ahead of time... be prepared to customise something in there! Just a reminder in case you didn't see my post you can save yourself ANY potential radiator headaches since I just happen to have a loyale radiator customized for EJ22 laying around. Put it in in April of 2004 and pulled it out the same month this year so its in perfect shape. --E Link to comment Share on other sites More sharing options...
ballitch Posted June 18, 2005 Share Posted June 18, 2005 dont worry 'cuda, if your not done with your conversion, ill let you take my car out for a spin at the meet...........................jealous.............theres a little motovation for ya. ~Josh~ Link to comment Share on other sites More sharing options...
baccaruda Posted June 18, 2005 Author Share Posted June 18, 2005 argh. thanks for the motivation. i went out to the shop to put in the lift and it was locked... another setback. plus i ddnt' get one of the shocks or the top spring seats in as i'd hoped to this week. i have catchup stuff to do today such as refoaming the heater plenum, and assembling a 4.11 LSD that I am going to sell to pay for a new windshield and tires... beef: thanks but i have a new radiator and I'm already over budget... I'll keep yours in mind in case it turns out that I need it. thanks Link to comment Share on other sites More sharing options...
NoahDL88 Posted June 18, 2005 Share Posted June 18, 2005 , and assembling a 4.11 LSD that I am going to sell to pay for a new windshield and tires... How much were you looking to get for the 4.11 LSD? Link to comment Share on other sites More sharing options...
baccaruda Posted June 19, 2005 Author Share Posted June 19, 2005 the last one on ebay went for $650 and I'd like to see that happen for me, otherwise i'm not going to be able to justify buying new tires and a new windshield for my wagon. Link to comment Share on other sites More sharing options...
NoahDL88 Posted June 19, 2005 Share Posted June 19, 2005 k, nm, i'll convert one myself. but get those ebay suckers for all there worth. Link to comment Share on other sites More sharing options...
baccaruda Posted June 19, 2005 Author Share Posted June 19, 2005 i intend to. i'm putting in new seals for the stubs and i'm even going to see if the dealership can get the stickers new. in other news, i've decided that I won't have the wagon ready for WCSS. oh well. Link to comment Share on other sites More sharing options...
TurboSPFI Posted June 21, 2005 Share Posted June 21, 2005 Just to let you guys know... YOU GOT WAY OFF TRACK! Link to comment Share on other sites More sharing options...
NoahDL88 Posted June 23, 2005 Share Posted June 23, 2005 Just to let you guys know... YOU GOT WAY OFF TRACK! How 'bout those Pistons!! Link to comment Share on other sites More sharing options...
TurboSPFI Posted June 23, 2005 Share Posted June 23, 2005 Lol! Link to comment Share on other sites More sharing options...
TurboSPFI Posted July 25, 2005 Share Posted July 25, 2005 update on this? Link to comment Share on other sites More sharing options...
NoahDL88 Posted July 25, 2005 Share Posted July 25, 2005 I borked the engine in my new Impreza, so the swap is on hold until that car is running again, the engine should be crossing the Mississippi any time now. the car should be good to go by the middle of next week, by the 3rd at the latest. once that is good to go, and the adapter plate shows up i'll be ready to pull and swap all the goodies that will make my baby run again. I got the Kennedy Adapters wiring printout, as Shawn has said, i will concur with him. Makes it as simple as cake, well as simple as a 7 layer cake with a 3 tier design and a chocolate waterfall can be. basically what i'm saying is that if its simple enough for me, then anyone can figure it out. Link to comment Share on other sites More sharing options...
baccaruda Posted July 25, 2005 Author Share Posted July 25, 2005 mmmmm.... chocolate waterfall.... i've been so lazy with my car lately. next weekend i promise! Link to comment Share on other sites More sharing options...
lepetitprince Posted July 25, 2005 Share Posted July 25, 2005 Do you plan to put d/r tranny in your impreza? I borked the engine in my new Impreza, so the swap is on hold until that car is running again, the engine should be crossing the Mississippi any time now. the car should be good to go by the middle of next week, by the 3rd at the latest. once that is good to go, and the adapter plate shows up i'll be ready to pull and swap all the goodies that will make my baby run again. I got the Kennedy Adapters wiring printout, as Shawn has said, i will concur with him. Makes it as simple as cake, well as simple as a 7 layer cake with a 3 tier design and a chocolate waterfall can be. basically what i'm saying is that if its simple enough for me, then anyone can figure it out. Link to comment Share on other sites More sharing options...
NoahDL88 Posted July 25, 2005 Share Posted July 25, 2005 Do you plan to put d/r tranny in your impreza? Not right now, i'm more concerned about getting the 88 running, can't leave D-troit with out it running. the imp is gonna get the 5MT out of the legacy, but thats gonna wait until Sea-Towne. But now you have piqued my intrest, i may have to call up my man Mudrat and see if this is possible, with an RX tranny and the NA low range it might be a good time, with AWD and a center lock. Giggidy Giggidy, all right. Link to comment Share on other sites More sharing options...
lepetitprince Posted July 25, 2005 Share Posted July 25, 2005 Plan to move to seattle? It's great and you will like it there... I miss that place very much.. Not right now, i'm more concerned about getting the 88 running, can't leave D-troit with out it running. the imp is gonna get the 5MT out of the legacy, but thats gonna wait until Sea-Towne. But now you have piqued my intrest, i may have to call up my man Mudrat and see if this is possible, with an RX tranny and the NA low range it might be a good time, with AWD and a center lock. Giggidy Giggidy, all right. Link to comment Share on other sites More sharing options...
NoahDL88 Posted July 25, 2005 Share Posted July 25, 2005 Plan to move to seattle? It's great and you will like it there... I miss that place very much.. I was there for 2 summers and a winter vacation. i loved it then and i love it now. I went to the WCSS7 and almost didn't get back on the plane to come back to michigan. Link to comment Share on other sites More sharing options...
baccaruda Posted June 18, 2007 Author Share Posted June 18, 2007 wow, I started this project a while ago! Now why on earth would I be bumping this old thread? :grin: Link to comment Share on other sites More sharing options...
86BRATMAN Posted June 18, 2007 Share Posted June 18, 2007 wow, I started this project a while ago! Now why on earth would I be bumping this old thread? :grin: Might it have something to do with some sort of thing that involved 5 of something? Link to comment Share on other sites More sharing options...
baccaruda Posted June 18, 2007 Author Share Posted June 18, 2007 you lost me on that one. Link to comment Share on other sites More sharing options...
86BRATMAN Posted June 18, 2007 Share Posted June 18, 2007 you lost me on that one. it was random, I just wanted to subscribe so I could find out why... Link to comment Share on other sites More sharing options...
baccaruda Posted June 18, 2007 Author Share Posted June 18, 2007 ohhhhhhhkay. anyway, it runs, and except for the driver's seat, the bumpers, and some interior plastic, it's in one piece! Link to comment Share on other sites More sharing options...
86BRATMAN Posted June 18, 2007 Share Posted June 18, 2007 Awesome stuff man.... BTW thats a huge banana Link to comment Share on other sites More sharing options...
monstaru Posted June 18, 2007 Share Posted June 18, 2007 woooooo************inhooooooo.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! no more hearin"when i get my wagon running, i'm gonna.......when i get my wagopn running....we can..." \ Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now