Jump to content
Ultimate Subaru Message Board

How hard is it to replace the starter on 99 outback?


Recommended Posts

Today I found out my 99 outback needs a new starter at the cost of $433.50 said the dealer. Anyway, I am pursuing other options...$95 starter for auto part store...husband and neighbor installing it. My question: Is it hard to get to the starter and difficult to do on your own? I plan on buying my car's manual tomorrow as well.

Link to comment
Share on other sites

I work at the dealer.. and have seen all the subaru modles.... the starters are all in the same spot! (this is the easy part)

 

2 bolts hold the starter to the tranny.. one more holds the batt cable to the starter, and one clip-on wire for the solenoid! viola! its off! now put the new starter in its place!!

 

(remember to disconnect the ground terminal at the battery unless you have plastic wrenches :-p )

 

on the 99 OB, there might be the airbox housing in the way on that.. i have not actually replaced the starter but it is a very easy task-

 

you should only need- a 10mm, 12mm and a 14mm wrench for this...

 

good luck! :banana:

Link to comment
Share on other sites

Today I found out my 99 outback needs a new starter at the cost of $433.50 said the dealer. Anyway, I am pursuing other options...$95 starter for auto part store...husband and neighbor installing it. My question: Is it hard to get to the starter and difficult to do on your own? I plan on buying my car's manual tomorrow as well.

How do you know you need a new starter ? Your car seems a little too young for that. Most of the time, when the starter does'nt spin but clicks it's the solenoids inner contacts fault. Very easy to replace and much cheaper. Only a few dollars for the L contacts.

If you make a search on this BB with «solenoid contacts» for key words, you'll find lots of information on how to do it.

Good luck!

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...