peterattray Posted December 13, 2004 Share Posted December 13, 2004 Hey regards to all. Just wondering if there is a step by step illustrated guide to installing an intercooler? If not...oh well Im just abit hesitant about doing anything under the hood.(by myself) :-\ Like what do I need?? What do I have to be aware of? do i have to add anything else after? Link to comment Share on other sites More sharing options...
calebz Posted December 13, 2004 Share Posted December 13, 2004 Most of it depends on what intercooler you are using. You need.. Intercooler Intercooler hoses (silicone preferred) Steel IC pipes.. (if appropriate to your application) Brackets/mounting hardware(dependant again on application.. TMIC/FMIC) Bypass valve is recommened. How its plumbed depends on a combination of what IC you use and how the IC is plumbed. Link to comment Share on other sites More sharing options...
Myxalplyx Posted December 13, 2004 Share Posted December 13, 2004 It's funny that you ask this because I'm doing this very thing right now and even posted about it. Installing an air-to-air intercooler is much simpler than installing an air-water intercooler so this is the route I chose. Right now I just need to get the piping together to complete a top mount installation. If you want, you can see me fumbling around with trying to complete this in my post. I'm not afraid to share my mistakes either. Ha! http://www.ultimatesubaru.org/forum/showthread.php?t=26592 Link to comment Share on other sites More sharing options...
peterattray Posted December 14, 2004 Author Share Posted December 14, 2004 Awesome cheers guys. Yep I checked your thread. And Ive been keeping an eye on calebs work!!! Good stuff. Yep Ill keep my eyes open, and watch all your mistakes, heh heh. Again cheers guys. Ill keep posting what i also get done. Gotta go see some sheep with my son for xmas. Cheers Link to comment Share on other sites More sharing options...
Myxalplyx Posted December 14, 2004 Share Posted December 14, 2004 Awesome cheers guys. Yep I checked your thread. And Ive been keeping an eye on calebs work!!! Good stuff. Yep Ill keep my eyes open, and watch all your mistakes, heh heh. Again cheers guys. Ill keep posting what i also get done. Gotta go see some sheep with my son for xmas. Cheers Still though, you need a more extensive step by step process. I was lucky enough to happen to have intercoolers in my garage, a car that happened to already have a hood scoop. I understand that everyone doesn't have the resources to be cutting their hood open and installing some aftermarket hood scoop. That's an FAQ all it's own despite how simple it may seem. After that, you have to shop around for intercoolers. There are so many intercoolers to choose from and the one you choose should determine how big of a hole you need to cut into your hood. If you choose an air-water intercooler, no cutting of the hood is necessary but you rarely see anyone with this setup so they'll be less help available. Here's a decent write up on intercoolers (why you should use them, the affect it can have on a non-intercooled car, what you need, etc). http://www.turbonation.com/intrcool.htm Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now