FMIC How to

[Jeepman775]

First of all if you are really serious about getting an FMIC you are going to need to take out you A/C. Then you can fit a huge one in. Anyway can anyone think of a slick easy way to do the IC plumbing on an FMIC, I am going to start with a small one as that is all I can afford at the moment. Plus I'd like to keep my spool time a few more weeks. Here is a pick of the one I one. My next one is going to be one with input output on opposite ends.

[archemitis]

First of all if you are really serious about getting an FMIC you are going to need to take out you A/C. Then you can fit a huge one in. Anyway can anyone think of a slick easy way to do the IC plumbing on an FMIC, I am going to start with a small one as that is all I can afford at the moment. Plus I'd like to keep my spool time a few more weeks. Here is a pick of the one I one. My next one is going to be one with input output on opposite ends.

thats a ford probe/mazda intercooler, i always liked that one. use prebent exhaust tubing, and silicone, or rubber couplings. use around 1/78, since thats close to what the tubes were on the probe, and it'll keep your spool time quick. theres a recirc valve that you can plumb in, from the probe/mazda.

[bajavwnsoobnut]

well for when you go with the other IC just take a look at how this guy did his: http://www.boostcruising.com/forums/index.php?act=section&sectionID=6&entryID=201

 

found it on yahoo while doing a search for images of RX's a short while back