WJM Posted December 17, 2004 Share Posted December 17, 2004 12033AA000 that fits ALL EA82 engines, turbo or not. and thats the STD bore. there are 9 sets left in the country....I cant get them for USMB for ~$180. Complete set. 010 is the .25 over, and none in country, ~180 on those as well....can get from JAPAN. 020 is .5 over, 11 in atlanta... ~$121 usmb cost. Link to comment Share on other sites More sharing options...
archemitis Posted December 17, 2004 Share Posted December 17, 2004 nice, most subarus(non boosted) i have pulled apart look like a ball hone and a rering is all they need. you can usualy still see the cross hatch from the initial machining even on a 200kmile motor. so standard rings should work for most peepl. Link to comment Share on other sites More sharing options...
erik litchy Posted December 17, 2004 Share Posted December 17, 2004 your metric to standard conversion doesnt sound right Link to comment Share on other sites More sharing options...
WJM Posted December 17, 2004 Author Share Posted December 17, 2004 your metric to standard conversion doesnt sound right the overbore is directly whats listed in the EPC. Link to comment Share on other sites More sharing options...
Caboobaroo Posted December 17, 2004 Share Posted December 17, 2004 what about carby pistons to match those rings Will? Me gonna need a nice set when I rebuild a motor for the RX....MWAHAHAHAHAHAHAHA:grin: I'd need the pistons to match the last bore of rings you have posted on here... Link to comment Share on other sites More sharing options...
JWX Posted December 18, 2004 Share Posted December 18, 2004 umm get a set made should be much better in the long run Link to comment Share on other sites More sharing options...
WJM Posted December 18, 2004 Author Share Posted December 18, 2004 what about carby pistons to match those rings Will? Me gonna need a nice set when I rebuild a motor for the RX....MWAHAHAHAHAHAHAHA:grin: I'd need the pistons to match the last bore of rings you have posted on here... MPFI and Carb pistons list as SAME part number. SPFI are separate PN, as are the 85-86 Turbo( pistons, 87-88 B, and 88-90 B. umm get a set made should be much better in the long run Cosworth builds all their engines with OE SUBARU piston rings. Go figure. Link to comment Share on other sites More sharing options...
erik litchy Posted December 18, 2004 Share Posted December 18, 2004 the overbore is directly whats listed in the EPC. 10 millimeter = 0.3937008 inch thats a big overbore to me. Link to comment Share on other sites More sharing options...
WJM Posted December 18, 2004 Author Share Posted December 18, 2004 it might be in mm then...0.25mm? 0.5mm? Link to comment Share on other sites More sharing options...
WJM Posted December 18, 2004 Author Share Posted December 18, 2004 or wiat, maybe it was 0.025 and 0.050 overbore....i'll look tomorrow and see....wait, LOL, monday. Link to comment Share on other sites More sharing options...
JWX Posted December 18, 2004 Share Posted December 18, 2004 I was talking about pistons Link to comment Share on other sites More sharing options...
Caboobaroo Posted December 19, 2004 Share Posted December 19, 2004 so then what pistons should I use in my RX for the higher compression which I believe was like 9.5:1 or so....? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now