archemitis Posted August 18, 2003 Share Posted August 18, 2003 i am torn here. i have a ea81 hatch, with carb. i am trying to figure out if i should graft mpfi from an ea82, and build custom manifolds and turbo/intercooler, with a t3. or put a 2.2 na in there. a stock 2.2 would have as much hp, if i turbo the ea81 right , argh. what do you guys think? its for street use, and i think i'll stick with 2wd 5speed. hondabeater:clap: Link to comment Share on other sites More sharing options...
GLCraig Posted August 18, 2003 Share Posted August 18, 2003 well, a stock EJ22 is something like 130hp and a stock EA81T is around 95hp . Now if you go with the 2.2 route, you could still put a turbo on it. Link to comment Share on other sites More sharing options...
archemitis Posted August 18, 2003 Author Share Posted August 18, 2003 SEE... you said stock EA81T. im gonna use a na lower end, and push about 15lbs with a t3, and use mpfi, or spfi. that should double my 75 horsepower, and i will save alot of weight. i figure i can either focus on building manifolds, or swaping the motor, and tranny. Link to comment Share on other sites More sharing options...
GLCraig Posted August 18, 2003 Share Posted August 18, 2003 yeah but you could push 15lbs into a 2.2 and get into the 250-275 range Link to comment Share on other sites More sharing options...
Nug Posted August 18, 2003 Share Posted August 18, 2003 2.2's look cooler. Link to comment Share on other sites More sharing options...
archemitis Posted August 18, 2003 Author Share Posted August 18, 2003 OKOK. guess i knew that was coming. 2.2 it is! then its seeya mustangs:burnout: seems like im gonna have to just stumble through it, cuz i am not finding much ifno. everybody wants to make money off it, isntead of giving it away Link to comment Share on other sites More sharing options...
archemitis Posted August 19, 2003 Author Share Posted August 19, 2003 untill i stumbled onto the byb forum:banana: ej swap conversation all over the place Link to comment Share on other sites More sharing options...
s'ko Posted June 2, 2004 Share Posted June 2, 2004 What did you find out about the sawp. What is needed to make it happen? BW Link to comment Share on other sites More sharing options...
archemitis Posted June 3, 2004 Author Share Posted June 3, 2004 damn, this post makes me feel like a wussie. time always screws me, along with money. i ended up with a na ea82 xt motor, with mpfi. i have all the parts to turbo it cept a ea82t exhaust housing, to mate to a lecacy turbo. i would much rather have 130na hp than the 100 that i have now, even with the bigger tires, but im happy with the swap, and am puttin on some serious miles lately. as far as stickin in a 2.2 it should be easy as wiring it up, and making motor mounts and tranny mounts fit. might try that after i boost the crap out of this motor. the australian byb guys have tons of info on the 2.2 swap, and they are the ones who steered me in the right direction to get my ea82 mpfi running. good luck, more hp is always better! Link to comment Share on other sites More sharing options...
archemitis Posted June 3, 2004 Author Share Posted June 3, 2004 just note the date of the original post, almost one year. it only took me about 2 months to get the swap all done and running reliably. Link to comment Share on other sites More sharing options...
Matty B Posted June 3, 2004 Share Posted June 3, 2004 G'day Fellas, It may be my 10 cents worth, but I would go th 2.2 and the more factory HP you start with, the less you have to twist its neck to get some performance. Less mods = better reliability Plus its going to scream if you throw boost at it later. All the best from Tasmania (isn't the internet a wonderfull thing) Link to comment Share on other sites More sharing options...
GeneralDisorder Posted June 3, 2004 Share Posted June 3, 2004 Built EA81's are cool, but 15 lbs of boost on a stock EA81 is not going to be easy.... gonna be tought to keep it in head gaskets I would think. It does only have 8.7:1 compression tho. GD Link to comment Share on other sites More sharing options...
ShawnW Posted June 3, 2004 Share Posted June 3, 2004 congrats! my project has drug out way longer than that! Link to comment Share on other sites More sharing options...
The Scooby Posted June 3, 2004 Share Posted June 3, 2004 hey archemitis, you mind making me a pig tail or a writeup on exactally waht wires go where, i want to put a 2.2 or 2.5 in my 86 carbed wagon along with the 5sp AWD tranny, these EA82's dont have the nuts i need. Thanks, Shean Link to comment Share on other sites More sharing options...
Flakrabbit Posted June 3, 2004 Share Posted June 3, 2004 Now I'm thinging of converting the Brat over to an EA82T...the bellhousings are the same? Flak Link to comment Share on other sites More sharing options...
Hondasucks Posted June 3, 2004 Share Posted June 3, 2004 I think my turbowagon should be getting an EJ22 with a Turbo (note I didn't say EJ22T, those are too damn hard to find, but I think sticking a stock EA82 Turbo onto an EJ22 N/A motor would pep it up a lil bit... Got a line on an NA Legacy wagon, 5 speed 4WD, crunched in the front, might be able to trade my Justy for the motor and wiring and crap... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now