Ross Posted December 22, 2004 Share Posted December 22, 2004 An old post on converting ea81ts to manual say that the driveshaft must be replaced. I have done this, but they appear identical and the driveshaft from the auto is in much better condition. I would therefore like to swap the two. Am I missing some subtle, yet important, difference? The same post also said the speedo cable must be replaced, but I am using the auto cable without problem. Link to comment Share on other sites More sharing options...
GLCraig Posted December 22, 2004 Share Posted December 22, 2004 Measure the distance between the u-joints, if they are the same then the driveline is probably the same. Link to comment Share on other sites More sharing options...
[HTi]Johnson Posted December 22, 2004 Share Posted December 22, 2004 Um I had a ea81 3 AT and did a swap to a manual. Using the same driveline. [HTi]Johnson ____ edit ____ Oh, I'm not sure about turbo, they should be the same. But That's just what I think shoudl be right So yuo did a swap from Auto to manual? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now