45psi Posted December 23, 2004 Share Posted December 23, 2004 1-3-2-4 is what i understand from reading where does 1 start on the dizzy? (looking at the distributor from the front of the car) Link to comment Share on other sites More sharing options...
[HTi]Johnson Posted December 23, 2004 Share Posted December 23, 2004 I believe 1 is the one closest to the intake. like this engine 1 3 4 2 front of car Link to comment Share on other sites More sharing options...
MilesFox Posted December 23, 2004 Share Posted December 23, 2004 #1 cylinder on the disty cap is the one that faces rearmost to the firewall. its will be closest to the clip or screw for the cap on the back side. the screw will be slightly to the right of the #1 connection the rotor rotates counter clockwise, and #1 cylinder is ont he front passenger side of the motor Link to comment Share on other sites More sharing options...
MorganM Posted December 23, 2004 Share Posted December 23, 2004 It's usually marked on the cap somehow. Often times just a funny bump or difference in molding of the plastic there. But MilesFox is dead on; its the upper right one by the firewall/brake master cylinder (looking directly at the cap in the car) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now