heep70 Posted December 25, 2004 Share Posted December 25, 2004 Did the 86 EA82 engines have studs in the heads to fasten the exhaust on? If so what size are they. Link to comment Share on other sites More sharing options...
GLCraig Posted December 25, 2004 Share Posted December 25, 2004 Yep they have studs, 10mm if I remeber right. Link to comment Share on other sites More sharing options...
WJM Posted December 25, 2004 Share Posted December 25, 2004 10mm studs...with 14MM Ti nuts. i dont rmemeber the thread pitch... Link to comment Share on other sites More sharing options...
canajun2eh Posted December 25, 2004 Share Posted December 25, 2004 Studs are 10 mm diameter, 1.25 pitch. Nuts are stainless steel, and take 14 mm deep socket. If you're buying new studs, try to get the ones with continuous thread, so that it won't matter which end you thread into the head. If you get the ones with an unthreaded piece, you'll need to insert the shorter threaded length into the head. I can't tell you how much these studs are from a dealer. A local fastener supply place carries them at $2.08 Canadian each, plus taxes. Link to comment Share on other sites More sharing options...
heep70 Posted December 25, 2004 Author Share Posted December 25, 2004 I was kinda wondering if they were stainless. Are the studs stainless also? I wonder if Subaru would still stock them? Link to comment Share on other sites More sharing options...
mtnman38 Posted December 25, 2004 Share Posted December 25, 2004 I was kinda wondering if they were stainless. Are the studs stainless also? I wonder if Subaru would still stock them? Yea suby still stocks them but there like 5 bone go to tacoma screw they hace um for like 2 as far as stainless tacoma screw would probably get them if you want then Im sure thers one by you some where LT Link to comment Share on other sites More sharing options...
WJM Posted December 25, 2004 Share Posted December 25, 2004 the dealers SHOULD stock them, as the nuts are the same ones used one ALL turbo cars....and studs are a little more iffy... SUBARU stock massive number of them in the warehouses. Be warned...the nuts are NOT cheap. But WELL worth the $...that way you dont end up with rusty stuff when you need to redo something or what not. Link to comment Share on other sites More sharing options...
heep70 Posted December 25, 2004 Author Share Posted December 25, 2004 I kinda had a feeling they would cost some $$$ from Subaru. I will do some calling before I venture out into the great unknown caosty world. You know what I am talking about mtnman38 Link to comment Share on other sites More sharing options...
MilesFox Posted December 26, 2004 Share Posted December 26, 2004 i have seen them at napa and also at adv. auto or autozone in ghe "help" brand aislt. as long as you know the dimensions 1.25 thread 10mm. may be labelled "import manifold studs" Link to comment Share on other sites More sharing options...
idosubaru Posted December 26, 2004 Share Posted December 26, 2004 if you ask or have them look them up, they may say that they don't have any exhaust bolts that fit or there is no part number listed for a subaru. but they will have ones that work. they may not be EXACTLY the same, but you'd never notice the difference. i've always found it best to take one in and match it up. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now