RedNed Posted August 19, 2003 Share Posted August 19, 2003 I just looked at the intake on my 91 Loyale wagon. What a joke. Are there any fixes for the ridiculasly(spelling not a strong point) small MAF. I cut a nice hole in my filter box so I get a bit of ram effect from behind the headlight, but I don't see how it will help b/c the MAF is the most restrictive point from what I can figure. Link to comment Share on other sites More sharing options...
Hondasucks Posted August 19, 2003 Share Posted August 19, 2003 Do those use a hot-wire MAF, or a Vane type MAF? If it's Vane, you *might* be able to use a MAF off of an older Turbo car, or MPFI car. not sure though. Link to comment Share on other sites More sharing options...
Adam N.D.J. Posted August 19, 2003 Share Posted August 19, 2003 Is it a SPFI? I'm reckoning it is, cause of the disgust in the MAF. It's a hot wire, so it's a problem trying to get another one for it. It has a pretty specific voltages that it runs off of, and sends to the computer. I would get the specifications for it, the voltages, and what pins are whot, and then look around for another one that looks the same but is bigger, and has the same specs, then see if it will work. Lotsa luck. Link to comment Share on other sites More sharing options...
RedNed Posted August 19, 2003 Author Share Posted August 19, 2003 Yes SPFI. Yes Hotwire type. I was hoping someone had done this already but hey at least now I know where to start. Votages eh! This is going to be more invovled then I thought/hoped. It may be a while before I can get on this but I'll let you know if I accomplish anything worthwhile. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now