ausubaru92 Posted December 29, 2004 Share Posted December 29, 2004 I have noticed that for the first few minutes of driving my car dosent have the normal power it has at WOT. is this cos of the choke? can i adjust it so it unchokes earlier, (i live in a hot climate) Thanks Link to comment Share on other sites More sharing options...
Nug Posted December 29, 2004 Share Posted December 29, 2004 For the first few minutes of operation, the engine likes a richer a/f ratio. Power levels are expected to be lower. You CAN adjust the choke, but full throttle while the engine is cold isn't recommended either way, so my advice is to let it warm up some with the choke at the current setting, THEN rag on it. Link to comment Share on other sites More sharing options...
archemitis Posted December 29, 2004 Share Posted December 29, 2004 yes, i agree with snotrocket. no need to have full power potential untill your car is up to operating temp. and thats even a few minutes after the choke opens up all the way. Link to comment Share on other sites More sharing options...
roxtar Posted December 29, 2004 Share Posted December 29, 2004 yes, i agree with snotrocket. no need to have full power potential untill your car is up to operating temp. and thats even a few minutes after the choke opens up all the way. right, my new car has 2 fuel cut-offs for different operating temps. the cold one is at 7k and the regular, warm one is at 8200. redlining a cold motor is no good Link to comment Share on other sites More sharing options...
ballitch Posted December 30, 2004 Share Posted December 30, 2004 the thought of some fool starting his car and redlining the damn thing makes me want to commit a capital offence, just wait for the damn thing to come up to operating temp. its an aluminum block and heads car for crying out loud. Link to comment Share on other sites More sharing options...
archemitis Posted December 30, 2004 Share Posted December 30, 2004 if you realy want a race car, pull the choke shaft out all the way, and use the accelerator pump to enrichen it on start up. =] then the plate and shaft arent in the way. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now