howards11 Posted January 2, 2005 Share Posted January 2, 2005 This concerns my 2000 Forester L. Due to a rear tire problem (which will be repaired on Monday) I had to switch the car to FWD. Question: I am using a 20 amp fuse in the FWD socket. Is this OK or does it need a 30 amp ? The owners manual makes no mention of the fuse size. Thanks in advance for your help. ~Howard :-\ Link to comment Share on other sites More sharing options...
sportsterbrat Posted January 2, 2005 Share Posted January 2, 2005 If a 20 amp does'nt blow it will be ok. I think i have seen somewhere that it takes a 20 Link to comment Share on other sites More sharing options...
friendly_jacek Posted January 2, 2005 Share Posted January 2, 2005 I used 15 AMP and it was fine for a couple of hundred of miles till I fixed the tire (FWD light was on all the time). Link to comment Share on other sites More sharing options...
MPtyza Posted January 2, 2005 Share Posted January 2, 2005 I know that for a '94 Legacy I test drove, the manual said to put a 15 amp fuse in there. I don't know if it would be any different for a Forester though Link to comment Share on other sites More sharing options...
howards11 Posted January 2, 2005 Author Share Posted January 2, 2005 I want to tank everyone for their help. It looks like I'm OK with the 20 amp fuse. ~Howard Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now