cargo cover repair help

[86subaru]

i picked up 2 cargo covers at a junkyard , they seemed to work good, i put 1 of them in my 88 turbo wagon , it worked good for a few pulls , now it will not roll back by it self, is there a way to fix them ?

[Skip]

Jim -

give me a_ "S"

give me an "E"

give me an "A"

give me a_ "R"

give me a_ "C"

give me a_ "H"

 

What's that spell??

 

Found this for you

hope it helps.

 

Posted by

SubaRub

It's really easy. Take off the end caps. I used a nail to punch the pins out.Roll it up and throw a rubber

band on it. Take some vise grips and twist the spring up nice and snug, don't twist it so much that it

breaks the spring. Now with the tension on, have someone hold the vise grips while you put the

opposite end cap back on. Once the pin is back in the end cap, you can release the vise grips. Voila!

[86subaru]

i did a SEARCH ,DID NOT FIND ANYTHING ON REPAIR OF CARGO COVERS ,and i am having a hard time keeping logged in :-p:grin: ok,

[thealleyboy]

Gimme an "F"

Gimme a "U"

[MilesFox]

give me a "D" --felony that is, for drawing on the jail walls. i wonder if the search will bring me legal advice

 

yeah jim, i saw the little pins on the ends. but what makes them let go to begin with if thay are still there? and rolling up the spring, how can it let go to begin with if the pins were never removed?

 

anyway i tried the advance search function by post and would you know it the first 5 results are the posts on this very thread. sometimes searching for specific topics will only bring you posts that are asking and telling to search. so if you search for an answer the answer usually is to search

 

jim, you should get a FSM to have ready and waiting at your keyboard:rolleyes:

[86subaru]

bump:brow: