WJM Posted January 10, 2005 Share Posted January 10, 2005 So i took BOTH my rear axles out and changed out the boost and grease on the DOJ's...after the gravel excursion the boots were toast and they started clicking... So...after 1 hr...the axles were removed, serviced and back in and the car was on the ground. Now the axles are happy again...no more click and its all smooth back there. Link to comment Share on other sites More sharing options...
88rxsedan Posted January 11, 2005 Share Posted January 11, 2005 i need to do mine, write up? Link to comment Share on other sites More sharing options...
JWX Posted January 11, 2005 Share Posted January 11, 2005 I concur Link to comment Share on other sites More sharing options...
BobBrumby Posted January 11, 2005 Share Posted January 11, 2005 After I learnt to do the one nut way to seperate ball joint from lower control arm, it only took me about an hour to service my front doj whilst in the car. The previous day it took about twice the time cause I thought i had to undo radius rod bolts and sway bar mount. To add insult to injury this was a real noisy joint. A puller is nice to have too. But this is front so... Link to comment Share on other sites More sharing options...
88rxsedan Posted January 11, 2005 Share Posted January 11, 2005 well my left rear cv clicks when theres people in the back, or if i turn to the right really hard (body roll teheheh) and yeah, it kinda rumbles a little at speed.. i dont wanna buy a new one, just rebuild it Link to comment Share on other sites More sharing options...
BobBrumby Posted January 11, 2005 Share Posted January 11, 2005 make sure you use heaps of grease cause not enough will leave it noisy. What happened my 1st time. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now