RedBrat Posted January 23, 2005 Share Posted January 23, 2005 I am considering adding power steering to my Red Brat. Why?, they ask. Because my wife also needs to drive it on occasion and due to muscle, joint issues she doesn't have the greatest upper body strength. This makes steering in parking lots, etc. a bit of an issue. How big of a project would it be to convert the standard steering to power steering? I will be traveling up I-5 from CA to Ocean Shores, WA this summer and am considering having it done at that time. I believe there are board members that are accessable on the way or in that general area that run or work in qualified garages. I would appreciate two things: First, your thoughts on such a project and, Secondly, the contact info for someone to do the work. Thanks, Link to comment Share on other sites More sharing options...
78TurboBrat Posted January 23, 2005 Share Posted January 23, 2005 As far as i know i dont see why it wouldnt be possible. You could probably get all the parts you would need from the same era of car you have. like the P/S pump, lines, and the rack, and put them in to your brat. But i would wait and see what anyone else has to say on the idea. Link to comment Share on other sites More sharing options...
mcbrat Posted January 23, 2005 Share Posted January 23, 2005 should be a pretty easy swap. you will need the steering rack from a ea81 bodied vehicle, and the PS pump/brackets and lines. and I would also grab the linkage from the rack up to the steering column shaft. your 87's passenger side head should already have the holes for mounting the pump. after the swap is complete, you'll need an alignment. Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 23, 2005 Share Posted January 23, 2005 if you can get the parts or even if you don't, there's a really good Subaru shop in Portland, Or. A guy on the board here , richierich, and his dad run it and they do exceptional work. Ask any board member who has work done by him or has gone to him in need of parts. He even might have the parts needed to do the swap. Pm him and he'll be able to tell you if he ahs the parts, and how much it would cost plus labor. From what I hear, his labor charges are pretty reasonable for board members, plus you won't have to worry about some schmuck screwing it up! Link to comment Share on other sites More sharing options...
shawnsbrat Posted January 23, 2005 Share Posted January 23, 2005 I just posted tthe same question a couple days ago,along with what the guys said above you also may have a slight problem with the crossmember being different.Either get the original power steering crossmember or perform what should be an easy mod to make it fit.I will post the mods I have to do once I get the rack and see how it fits up.good luck Link to comment Share on other sites More sharing options...
RedBrat Posted January 24, 2005 Author Share Posted January 24, 2005 Thanks for the input. I have sent a message to richierich. Link to comment Share on other sites More sharing options...
Flowmastered87GL Posted January 24, 2005 Share Posted January 24, 2005 I second Richierich, I have taken many cars to him with good results each time (92 Loyale, 86 GL, 87 GL....) Link to comment Share on other sites More sharing options...
richierich Posted January 24, 2005 Share Posted January 24, 2005 Attn: RedBrat, I will email you about pricing later, as I am out of the shop but can talk about the conversion itself. We have done this to a couple of vehicles, My dad's old 82 BRAT, a Wagon for a customer. In addition my 85 BRAT has powersteering on it, installed by the previous owner, and I bought it for the same reason, my wife being able to drive my BRAT. In addition, it really does make it nicer to drive. Yes, you install the whole cross member, and all the power steering parts from another vehicle. The 84 and newer motors should have the 3 bolts on the head to mount up the power steering pump. On the 82 we did new headgaskets and switch out the head. It was the easiest conversion since the motor was out. Link to comment Share on other sites More sharing options...
gunslinger Posted January 24, 2005 Share Posted January 24, 2005 ive done the conversion on my '86 wagon. no probs except for some minor "tuning". everything bolts in. that is, if those brats came with factory power steering. ive never seen one with power personaly. Link to comment Share on other sites More sharing options...
themixtoo Posted January 25, 2005 Share Posted January 25, 2005 that is, if those brats came with factory power steering. ive never seen one with power personaly.Only Turbo BRATS came with power steering, but lots of 82-84 wagons and GL-10's had this option. Gary Link to comment Share on other sites More sharing options...
84gl Posted January 25, 2005 Share Posted January 25, 2005 the barat that i had i put power streering on it came off of 84 sedan which is the same petty much as the wagons Link to comment Share on other sites More sharing options...
baccaruda Posted January 25, 2005 Share Posted January 25, 2005 can you drill and tap the heads on the pre-84 models? (like mine? ) Link to comment Share on other sites More sharing options...
ShawnW Posted January 26, 2005 Share Posted January 26, 2005 No, because the metal isn't there to drill holes into. can you drill and tap the heads on the pre-84 models? (like mine? ) Link to comment Share on other sites More sharing options...
RedBrat Posted January 26, 2005 Author Share Posted January 26, 2005 Attn: RedBrat, I will email you about pricing later, as I am out of the shop but can talk about the conversion itself. No rush as it won't happen until a trip north this summer some time. It would be good if you and/or others in your area keep your eyes open for a good donor for the parts. It would help avoid just getting what is available at the time. Parts can be paid for when they are secured even tho installation may happen later. Thanks, Link to comment Share on other sites More sharing options...
baccaruda Posted January 26, 2005 Share Posted January 26, 2005 Aargh. thanks anyway. No, because the metal isn't there to drill holes into. Link to comment Share on other sites More sharing options...
richierich Posted January 26, 2005 Share Posted January 26, 2005 I have a least one set-up. But if I know I have another person interested I would buy another parts vehicle. To answer your question Barracuda, maybe. There is one already predrilled that is usually used for the ground cable. There may or may not be two more "tabs". If the tabs are there, then yes it can be drilled and tapped, but be careful because the waterjacket is right behind there. I am currently in the middle of moving to a larger shop, but will get a price quote to you after the first of February. Been working in one form or another till about 9:30 every night. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now