WJM Posted January 24, 2005 Share Posted January 24, 2005 It has come to my attention that the EBC greens that I use are becomming VERY VERY hard to get....thru anyone, and Ive been getting them thru Dale at boxer4racing.com...we talked at lenght about this this morning over the phone. HOWEVER...Carbotech Bobcat pads are WAY WAY better and the plates are exact fit if we order some from from Dale, as he is a distributor for Carbotech. The EBC's ive been getting are CLOSE...as the application is for the early Legacy's with the smaller brakes. EBC does NOT make Red stuff for them, and DO NOT make ANY pads for the Leone/Loyale stuff. Looking at $109 for a set of these pads. I've tried every pad under the sun...and the bobcats are certinly the BEST for street/autox/spirited street driving. The NAPA and other OEM style stuff is JUNK...unless you are just putzing around and dont care about it. So...lets see what kind of interest we have in these... Link to comment Share on other sites More sharing options...
spanky_pete Posted January 24, 2005 Share Posted January 24, 2005 By set do you mean 2 pads or 4? A lot of the pads I've priced come with 4 to cover both left and right calipers. And does this cover just front or front and rear brakes? Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 24, 2005 Share Posted January 24, 2005 depending on the answers to the questions spanky_pete just asked, I might be interested in a set for XT6 brakes:D Link to comment Share on other sites More sharing options...
carfreak85 Posted January 24, 2005 Share Posted January 24, 2005 What about rear pads? Does Carbotech have an application specifically for the rear subaru calipers? Also, I've been looking at PBR metal master pads, has anyone had any experience using these pads in a performance application? Link to comment Share on other sites More sharing options...
WJM Posted January 24, 2005 Author Share Posted January 24, 2005 this would be a set of 4 pads for the FRONT. Carbotech will make rears as well if the demand is there...aka 10 sets. Link to comment Share on other sites More sharing options...
JWX Posted January 24, 2005 Share Posted January 24, 2005 will they keep making them or will it be everytime we need rear pads, we have to order 10 sets? Link to comment Share on other sites More sharing options...
WJM Posted January 24, 2005 Author Share Posted January 24, 2005 will they keep making them or will it be everytime we need rear pads, we have to order 10 sets? depends on how much demand there is. If ppl will actually BUY them...instead of getting the POS NAPA/Autozone BS....and the OE doesnt hold a candle to these pads either...then there will be an avalible stock for them. I've raced/street driven cars with and with out these pads...the bobcats are worth every penny. Link to comment Share on other sites More sharing options...
nkx Posted January 25, 2005 Share Posted January 25, 2005 hmm..... and theyre made to work with OE rotors? ie: they arent going to warp things because they get really hot? Link to comment Share on other sites More sharing options...
WJM Posted January 25, 2005 Author Share Posted January 25, 2005 Yes. No...not unless you get them to 900*F. Link to comment Share on other sites More sharing options...
Do It Sidewayz Posted January 25, 2005 Share Posted January 25, 2005 i run the PBR metalmasters on the rally car...and they work just fine. i've come to the end of a 15 KM stage, after LFB'ing and all that, and sure...they stink a little, but didn't experience one bit of fade Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now