GeneralDisorder Posted August 24, 2003 Share Posted August 24, 2003 The haynes manual says I've got to take it to a shop.... naw - there must be a better way to get em out, and the new ones in - anyone want to share? GD Link to comment Share on other sites More sharing options...
jimbo747 Posted August 24, 2003 Share Posted August 24, 2003 Get a balljoint seperator from your local auto parts chain (Autozone, Checker, Discount Auto, etc all have "free loaner tools"), and whack it with a hammer. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted August 24, 2003 Author Share Posted August 24, 2003 Really? Free loaner tools? I never heard about that..... amazing! GD Link to comment Share on other sites More sharing options...
GLCraig Posted August 24, 2003 Share Posted August 24, 2003 You could take the control arm and balljoint to a automotive manchine shop and have them do it. It shouldn't cost you that much. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted August 24, 2003 Author Share Posted August 24, 2003 Yeah - but I want to do it myself. Shouldn't be that hard - someone has to have done this before.... anyone? GD Link to comment Share on other sites More sharing options...
Turbone Posted August 24, 2003 Share Posted August 24, 2003 Yes, caveman style:D Take a hammer and sharply hit the ball joint end(housing) till it pops out. Same with the lower control arm ball joint, but this one may take a few serious whacks. Disclaimer: I will not be held responsible for damage done to hardware or body parts using this method:rolleyes: Rob Link to comment Share on other sites More sharing options...
GeneralDisorder Posted August 24, 2003 Author Share Posted August 24, 2003 sweeet - I got a loaner puller from Autozone, and popped the balljoints out of the control arm. Getting dark, so I'll replace them tommarow - replacement looks easy compared to removal, since I can use the nut to pull the lower half in, and the wieght of the car to push the upper half in. Looks like I'll have good ball joints soon. Total cost: 2 used balljoints - $0.00 1 loaner puller - $0.00 Total: $0.00 GD Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now